SliTaz armhf -- Xorg

root@slitaz:~# uname -a
Linux slitaz 3.2.27-slitaz #1 PREEMPT Fri Dec 14 15:01:17 CST 2012 armv6l GNU/Linux

root@slitaz:~# df -h
Filesystem Size Used Available Use% Mounted on
/dev/root 433.0M 83.7M 326.9M 20% /
tmpfs 92.3M 136.0K 92.2M 0% /run
devtmpfs 92.2M 0 92.2M 0% /dev
tmpfs 92.3M 0 92.3M 0% /dev/shm

root@slitaz:~# X -version

X.Org X Server 1.12.1
Release Date: 2012-04-13
X Protocol Version 11, Revision 0
Build Operating System: SliTaz-ARM GNU/Linux
Current Operating System: Linux slitaz 3.2.27-slitaz #1 PREEMPT Fri Dec 14 15:01:17 CST 2012 armv6l
Kernel command line: dma.dmachans=0x7f35 bcm2708_fb.fbwidth=1680 bcm2708_fb.fbheight=1050 bcm2708.boardrev=0x2 bcm2708.serial=0x7b32f4ce smsc95xx.macaddr=B8:27:EB:32:F4:CE sdhci-bcm2708.emmc_clock_freq=100000000 vc_mem.mem_base=0xc000000 vc_mem.mem_size=0x10000000 dwc_otg.lpm_enable=0 console=tty1 root=/dev/mmcblk0p2 rootfstype=ext4 elevator=deadline rootwait devtmpfs.mount=0
Build Date: 19 December 2012 10:40:53AM

Current version of pixman: 0.26.0
Before reporting problems, check http://www.slitaz.org/
to make sure that you have the latest version.

root@slitaz:~# ps | tail -25
124 root 0:00 [bcm2708_spi.0]
179 root 0:00 udevd --daemon
215 root 0:00 [kworker/0:2]
221 root 0:00 /sbin/udhcpc -b -T 1 -A 12 -i eth0 -p /var/run/udhcpc.eth0.pid
231 messageb 0:00 /usr/bin/dbus-daemon --system
244 haldaemo 0:00 /usr/sbin/hald --daemon=yes
245 root 0:00 hald-runner
249 root 0:00 {hald-addon-inpu} hald-addon-input: Listening on /dev/input/event1 /dev/input/event0
269 root 0:03 /usr/bin/slim -d
276 root 0:01 /usr/bin/Xorg -nolisten tcp -auth /var/run/slim.auth vt07
285 root 0:00 /usr/sbin/dropbear -b /etc/dropbear/banner
297 root 0:00 -sh
298 root 0:00 /sbin/getty 38400 tty2
299 root 0:00 /sbin/getty 38400 tty3
300 tux 0:00 /usr/bin/openbox --startup /usr/lib/openbox/openbox-autostart OPENBOX
316 tux 0:00 xterm
334 tux 0:00 /usr/bin/dbus-daemon --fork --print-pid 4 --print-address 6 --session
335 tux 0:00 /usr/bin/dbus-daemon --fork --print-pid 4 --print-address 6 --session
338 tux 0:00 sh
363 root 0:00 [kworker/0:0]
374 root 0:00 udevd --daemon
375 root 0:00 /usr/sbin/dropbear -b /etc/dropbear/banner
376 root 0:00 -sh
392 root 0:00 ps
393 root 0:00 tail -25
root@slitaz:~#