Slitaz -- kernel module

Extract From
http://doc.slitaz.org/en:guides:bluetooth
[..]
At the moment I am writing this guide the rfcomm module of Slitaz is compiled without tty support. You can check if this is the case with the following commands:

root@slitaz:/home/tux# zcat /proc/config.gz | grep RFCOMM
CONFIG_BT_RFCOMM=m
# CONFIG_BT_RFCOMM_TTY is not set
root@slitaz:/home/tux#

If CONFIG_BT_RFCOMM_TTY is not =y you must recompile the module with tty support. Install linux-source:

tazpkg get-install linux-source

cd in /usr/src/linux-`uname -r`/ and give this command:

make CONFIG_BT_RFCOMM=m CONFIG_BT_RFCOMM_TTY=y M=net/bluetooth/rfcomm

This will build only the rfcomm module with tty support. You will find it in /usr/src/linux-`uname -r`/net/bluetooth/rfcomm/rfcomm.ko. Now you can delete the old rfcomm module and replace it with your module:

rm /lib/modules/`uname -r`/kernel/net/bluetooth/rfcomm/rfcomm.ko.gz
cp /usr/src/linux-`uname -r`/net/bluetooth/rfcomm/rfcomm.ko /lib/modules/`uname -r`/kernel/net/bluetooth/rfcomm/
depmod -a
[..]