Slitaz -- iasl / acpi=ht / early_ioremap_debug -8

tux@slitaz:~$ cat /proc/cmdline 
root=/dev/sda1 acpi=ht early_ioremap_debug
tux@slitaz:~$ cat /var/log/dmesg.log 
map+0x61/0x15b
 [] early_ioremap+0xd/0xf
 [] __acpi_map_table+0x14/0x16
 [] acpi_os_map_memory+0x18/0x1a
 [] acpi_tb_verify_table+0x20/0x49
 [] acpi_get_table_with_size+0x53/0xa1
 [] ? acpi_parse_mcfg+0x0/0xfa
 [] ? generic_swap+0x0/0x27
 [] acpi_table_parse+0x4a/0x6f
 [] __pci_mmcfg_init+0x157/0x2e3
 [] ? dmi_get_year+0x30/0x4e
 [] ? pci_sanity_check+0x25/0x95
 [] ? pci_arch_init+0x0/0x53
 [] pci_mmcfg_early_init+0xd/0xf
 [] pci_arch_init+0x19/0x53
 [] do_one_initcall+0x4c/0x13a
 [] kernel_init+0x106/0x157
 [] ? kernel_init+0x0/0x157
 [] kernel_thread_helper+0x7/0x10
00000400 + ffe00000
early_iounmap(ffe00400, 0000003c) [0]
Pid: 1, comm: swapper Not tainted 2.6.30.6-slitaz #1
Call Trace:
 [] ? printk+0xf/0x11
 [] early_iounmap+0x81/0x119
 [] ? acpi_parse_mcfg+0x0/0xfa
 [] ? generic_swap+0x0/0x27
 [] __acpi_unmap_table+0x10/0x12
 [] early_acpi_os_unmap_memory+0x11/0x13
 [] acpi_table_parse+0x66/0x6f
 [] __pci_mmcfg_init+0x157/0x2e3
 [] ? dmi_get_year+0x30/0x4e
 [] ? pci_sanity_check+0x25/0x95
 [] ? pci_arch_init+0x0/0x53
 [] pci_mmcfg_early_init+0xd/0xf
 [] pci_arch_init+0x19/0x53
 [] do_one_initcall+0x4c/0x13a
 [] kernel_init+0x106/0x157
 [] ? kernel_init+0x0/0x157
 [] kernel_thread_helper+0x7/0x10
PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
PCI: Not using MMCONFIG.
PCI: Using configuration type 1 for base access
bio: create slab  at 0
ACPI: Interpreter disabled.
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
pci 0000:00:02.0: reg 10 64bit mmio: [0xfe400000-0xfe7fffff]
pci 0000:00:02.0: reg 18 64bit mmio: [0xd0000000-0xdfffffff]
pci 0000:00:02.0: reg 20 io port: [0xec00-0xec07]
pci 0000:00:1a.0: reg 20 io port: [0xe880-0xe89f]
pci 0000:00:1a.7: reg 10 32bit mmio: [0xfeafa000-0xfeafa3ff]
pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.7: PME# disabled
pci 0000:00:1b.0: reg 10 64bit mmio: [0xfeaf4000-0xfeaf7fff]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: PME# disabled
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: PME# disabled
pci 0000:00:1d.0: reg 20 io port: [0xe800-0xe81f]
pci 0000:00:1d.1: reg 20 io port: [0xe480-0xe49f]
pci 0000:00:1d.2: reg 20 io port: [0xe400-0xe41f]
pci 0000:00:1d.3: reg 20 io port: [0xe080-0xe09f]
pci 0000:00:1d.7: reg 10 32bit mmio: [0xfeaf8000-0xfeaf83ff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
pci 0000:00:1f.2: reg 10 io port: [0xe000-0xe007]
pci 0000:00:1f.2: reg 14 io port: [0xdc00-0xdc03]
pci 0000:00:1f.2: reg 18 io port: [0xd880-0xd887]
pci 0000:00:1f.2: reg 1c io port: [0xd800-0xd803]
pci 0000:00:1f.2: reg 20 io port: [0xd480-0xd48f]
pci 0000:00:1f.2: reg 24 io port: [0xd400-0xd40f]
pci 0000:00:1f.3: reg 10 64bit mmio: [0xfeaf2000-0xfeaf20ff]
pci 0000:00:1f.3: reg 20 io port: [0x400-0x41f]
pci 0000:02:00.0: reg 10 64bit mmio: [0xfebf0000-0xfebfffff]
pci 0000:02:00.0: PME# supported from D3hot D3cold
pci 0000:02:00.0: PME# disabled
pci 0000:00:1c.1: bridge 32bit mmio: [0xfeb00000-0xfebfffff]
pci 0000:00:1e.0: transparent bridge
pci 0000:00:1f.0: PIIX/ICH IRQ router [8086:3a18]
pci 0000:00:02.0: PCI->APIC IRQ transform: INT A -> IRQ 16
pci 0000:00:1a.0: PCI->APIC IRQ transform: INT A -> IRQ 16
pci 0000:00:1a.7: PCI->APIC IRQ transform: INT C -> IRQ 18
pci 0000:00:1b.0: PCI->APIC IRQ transform: INT A -> IRQ 22
pci 0000:00:1c.0: PCI->APIC IRQ transform: INT A -> IRQ 17
pci 0000:00:1c.1: PCI->APIC IRQ transform: INT B -> IRQ 16
pci 0000:00:1d.0: PCI->APIC IRQ transform: INT A -> IRQ 23
pci 0000:00:1d.1: PCI->APIC IRQ transform: INT B -> IRQ 19
pci 0000:00:1d.2: PCI->APIC IRQ transform: INT C -> IRQ 18
pci 0000:00:1d.3: PCI->APIC IRQ transform: INT D -> IRQ 16
pci 0000:00:1d.7: PCI->APIC IRQ transform: INT A -> IRQ 23
pci 0000:00:1f.2: PCI->APIC IRQ transform: INT B -> IRQ 19
pci 0000:00:1f.3: PCI->APIC IRQ transform: INT C -> IRQ 18
pci 0000:02:00.0: PCI->APIC IRQ transform: INT A -> IRQ 17
pnp: PnP ACPI: disabled
pci 0000:00:1c.0: PCI bridge, secondary bus 0000:01
pci 0000:00:1c.0:   IO window: disabled
pci 0000:00:1c.0:   MEM window: disabled
pci 0000:00:1c.0:   PREFETCH window: disabled
pci 0000:00:1c.1: PCI bridge, secondary bus 0000:02
pci 0000:00:1c.1:   IO window: disabled
pci 0000:00:1c.1:   MEM window: 0xfeb00000-0xfebfffff
pci 0000:00:1c.1:   PREFETCH window: disabled
pci 0000:00:1e.0: PCI bridge, secondary bus 0000:03
pci 0000:00:1e.0:   IO window: disabled
pci 0000:00:1e.0:   MEM window: disabled
pci 0000:00:1e.0:   PREFETCH window: disabled
pci 0000:00:1c.0: setting latency timer to 64
pci 0000:00:1c.1: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
pci_bus 0000:02: resource 1 mem: [0xfeb00000-0xfebfffff]
pci_bus 0000:03: resource 3 io:  [0x00-0xffff]
pci_bus 0000:03: resource 4 mem: [0x000000-0xffffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
NET: Registered protocol family 1
platform rtc_cmos: registered platform RTC device (no PNP device found)
highmem bounce pool size: 64 pages
fuse init (API version 7.11)
SGI XFS with security attributes, large block/inode numbers, no debug enabled
msgmni has been set to 1731
alg: No test for stdrng (krng)
io scheduler noop registered
io scheduler deadline registered (default)
pci 0000:00:02.0: Boot video device
Switched to NOHz mode on CPU #1
Switched to NOHz mode on CPU #0
pci 0000:00:1d.7: EHCI: BIOS handoff failed (BIOS bug?) 01010001
pcieport-driver 0000:00:1c.0: setting latency timer to 64
pcieport-driver 0000:00:1c.1: setting latency timer to 64
early_ioremap(7dd90390, 0000006c) [0] => Pid: 1, comm: swapper Not tainted 2.6.3 .6-slitaz #1
Call Trace:
 [] ? printk+0xf/0x11
 [] __early_ioremap+0x61/0x15b
 [] ? kobject_put+0x37/0x3c
 [] early_ioremap+0xd/0xf
 [] __acpi_map_table+0x14/0x16
 [] acpi_os_map_memory+0x18/0x1a
 [] acpi_tb_verify_table+0x20/0x49
 [] acpi_get_table_with_size+0x53/0xa1
 [] acpi_get_table+0x10/0x15
 [] acpi_processor_init+0x26/0xe3
 [] ? acpi_processor_init+0x0/0xe3
 [] do_one_initcall+0x4c/0x13a
 [] kernel_init+0x106/0x157
 [] ? kernel_init+0x0/0x157
 [] kernel_thread_helper+0x7/0x10
00000390 + ffe00000
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Non-volatile memory driver v1.3
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
brd: module loaded
loop: module loaded
Uniform Multi-Platform E-IDE driver
ide_generic: please use "probe_mask=0x3f" module parameter for probing all legac  ISA IDE ports
Probing IDE interface ide0...
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
ide1 at 0x170-0x177,0x376 on irq 15
ide-gd driver 1.18
ide-cd driver 5.00
Driver 'sd' needs updating - please use bus_type methods
Driver 'sr' needs updating - please use bus_type methods
ata_piix 0000:00:1f.2: version 2.13
ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
ata_piix 0000:00:1f.2: setting latency timer to 64
scsi0 : ata_piix
scsi1 : ata_piix
ata1: SATA max UDMA/133 cmd 0xe000 ctl 0xdc00 bmdma 0xd480 irq 19
ata2: SATA max UDMA/133 cmd 0xd880 ctl 0xd800 bmdma 0xd488 irq 19
e1000e: Intel(R) PRO/1000 Network Driver - 0.3.3.4-k4
e1000e: Copyright (c) 1999-2008 Intel Corporation.
pcnet32.c:v1.35 21.Apr.2008 tsbogend@alpha.franken.de
e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
e100: Copyright(c) 1999-2006 Intel Corporation
ThunderLAN driver v1.15a
TLAN: 0 devices installed, PCI: 0  EISA: 0
ns83820.c: National Semiconductor DP83820 10/100/1000 driver.
PPP generic driver version 2.4.2
PPP Deflate Compression module registered
PPP BSD Compression module registered
PPP MPPE Compression module registered
NET: Registered protocol family 24
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky 
dmfe: Davicom DM9xxx net driver, version 1.36.4 (2002-01-17)
winbond-840.c:v1.01-e (2.4 port) Sep-11-2006  Donald Becker 
  http://www.scyld.com/network/drivers.html
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1a.7: setting latency timer to 64
ehci_hcd 0000:00:1a.7: EHCI Host Controller
ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.7: debug port 1
ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfeafa000
ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfeaf8000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 8 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1a.0: setting latency timer to 64
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000e880
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000e800
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000e480
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000e400
usb usb6: configuration #1 chosen from 1 choice
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.3: setting latency timer to 64
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000e080
usb usb7: configuration #1 chosen from 1 choice
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
input: PC Speaker as /devices/platform/pcspkr/input/input0
cpuidle: using governor ladder
cpuidle: using governor menu
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
TCP cubic registered
NET: Registered protocol family 17
NET: Registered protocol family 15
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
Using IPI No-Shortcut mode
------------[ cut here ]------------
WARNING: at arch/x86/mm/ioremap.c:603 check_early_ioremap_leak+0x48/0x5c()
Hardware name: ValueStar
Debug warning: early ioremap leak of 1 areas detected.
Modules linked in:
Pid: 1, comm: swapper Not tainted 2.6.30.6-slitaz #1
Call Trace:
 [] warn_slowpath_common+0x65/0x7c
 [] ? check_early_ioremap_leak+0x48/0x5c
 [] ? check_early_ioremap_leak+0x0/0x5c
 [] warn_slowpath_fmt+0x24/0x27
 [] check_early_ioremap_leak+0x48/0x5c
 [] do_one_initcall+0x4c/0x13a
 [] kernel_init+0x106/0x157
 [] ? kernel_init+0x0/0x157
 [] kernel_thread_helper+0x7/0x10
---[ end trace 426f01cc83ab8016 ]---
please boot with early_ioremap_debug and report the dmesg.
usb 4-1: new low speed USB device using uhci_hcd and address 2
usb 4-1: configuration #1 chosen from 1 choice
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1:1. /input/input1
logitech 0003:046D:C517.0001: input: USB HID v1.10 Keyboard [Logitech USB Receiv r] on usb-0000:00:1d.0-1/input0
logitech 0003:046D:C517.0002: fixing up Logitech keyboard report descriptor
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1:1. /input/input2
logitech 0003:046D:C517.0002: input,hiddev96: USB HID v1.10 Mouse [Logitech USB  eceiver] on usb-0000:00:1d.0-1/input1
ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.01: SATA link down (SStatus 0 SControl 300)
ata1.00: ATA-7: ST3320620AS, 3.AAK, max UDMA/133
ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access     ATA      ST3320620AS      3.AA PQ: 0 ANSI: 5
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] 625142448 512-byte hardware sectors: (320 GB/298 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda: sda1 sda2 sda3 < sda5 sda6 > sda4
sd 0:0:0:0: [sda] Attached SCSI disk
ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.01: SATA link down (SStatus 0 SControl 300)
ata2.00: ATAPI: ATAPI   iHAS324   Y, BL1X, max UDMA/100
ata2.00: configured for UDMA/100
scsi 1:0:0:0: CD-ROM            ATAPI    iHAS324   Y      BL1X PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
sr 1:0:0:0: Attached scsi generic sg1 type 5
EXT3-fs: INFO: recovery required on readonly filesystem.
EXT3-fs: write access will be enabled during recovery.
kjournald starting.  Commit interval 5 seconds
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with writeback data mode.
VFS: Mounted root (ext3 filesystem) readonly on device 8:1.
Freeing unused kernel memory: 328k freed
EXT3 FS on sda1, internal journal
tux@slitaz:~$