#4 2008-05-07 09:23:02 alanyih Member
Re: Network Adapter not found
Try!! Cooking ISO - 20080425
ISO size: 24,4 Mb - http://www.slitaz.org/en/get/#cooking
http://listengine.tuxfamily.org/lists.t … 00080.html
>Hello,
>
>The Cooking ISO has been updated with all the last packages including
>important one such glibc-2.7, Busybox-1.10.1 and the Kernel with wifi
>support. The desktop have now icons and the backgroud managed by
>Netbox has been improved by Pascal and all the servers can be
>configured throught the new servers tab. Bootfloppybox can creat
>bootable floppy, wifibox (experimental) for wireless connection. PXE
>support is also now avalaible if you want to boot SliTaz from the
>network.
>ISO size: 24,4 Mb - http://www.slitaz.org/en/get/#cooking
alanyih
Last edited by alanyih (2008-05-07 09:26:56)
#5 2008-05-07 11:00:49 alanyih Member
Re: Network Adapter not found
ipw2200: Unable to load firmware: -2
"ipw2200-bss.fw request_firmware failed: Reason -2"
Thanks in advance for any help!
SliTaz GNU/Linux cooking-20080425 (24,4 Mb) - slitaz-cooking.iso [ md5 ]
http://www.slitaz.org/en/get/#cooking
root@slitaz:~# modprobe -v ipw2200
insmod /lib/modules/2.6.24.2-slitaz/kernel/drivers/base/firmware_class.ko.gz
insmod /lib/modules/2.6.24.2-slitaz/kernel/net/ieee80211/ieee80211_crypt.ko.gz
insmod /lib/modules/2.6.24.2-slitaz/kernel/net/ieee80211/ieee80211.ko.gz
insmod /lib/modules/2.6.24.2-slitaz/kernel/drivers/net/wireless/ipw2200.ko.gz
root@slitaz:~# lsmod
Module Size Used by
ipw2200 128200 0
ieee80211 27336 1 ipw2200
ieee80211_crypt 5248 1 ieee80211
firmware_class 7552 1 ipw2200
....
root@slitaz:~# ls -l /lib/firmware/
-rwxr-xr-x 1 root root 12007 Mar 7 2006 LICENSE.ipw2200-fw
-rwxr-xr-x 1 root root 191142 Mar 7 2006 ipw2200-bss.fw
-rwxr-xr-x 1 root root 185660 Mar 7 2006 ipw2200-ibss.fw
-rwxr-xr-x 1 root root 187836 Mar 7 2006 ipw2200-sniffer.fw
dmesg
........
ieee80211_crypt: unregistered algorithm 'NULL'
ieee80211_crypt: registered algorithm 'NULL'
ieee80211: 802.11 data/management/control stack, git-1.1.13
ieee80211: Copyright (C) 2004-2005 Intel Corporation
ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.2.2kmprq
ipw2200: Copyright(c) 2003-2006 Intel Corporation
ACPI: PCI Interrupt 0000:03:02.0[A] -> GSI 17 (level, low) -> IRQ 17
ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection
ipw2200: ipw2200-bss.fw request_firmware failed: Reason -2
ipw2200: Unable to load firmware: -2
ipw2200: failed to register network device
ACPI: PCI interrupt for device 0000:03:02.0 disabled
ipw2200: probe of 0000:03:02.0 failed with error -5
Last edited by alanyih (2008-05-07 11:06:37)
#6 2008-05-09 16:22:07 alanyih Member
Re: Network Adapter not found
Thanks Sygne.
http://forum.slitaz.org/viewtopic.php?id=279
Code:
wget http://www.us.kernel.org/pub/linux/util … 120.tar.gz
tar -xvf udev-120.tar.gz
mkdir /lib/udev
cp ./udev-120/extras/firmware/firmware.sh /lib/udev
mkdir /lib/firmware
cd /lib/firmware
tar -xvf /chemin/vers/mon/firmware.tgz
modprobe ipw2100
......
root@slitaz:~# ls -l /lib/udev
-rwxr-xr-x 1 root root 516 May 9 14:18 firmware.sh
dmesg
......
ieee80211_crypt: registered algorithm 'NULL'
ieee80211: 802.11 data/management/control stack, git-1.1.13
ieee80211: Copyright (C) 2004-2005 Intel Corporation
ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.2.2kmprq
ipw2200: Copyright(c) 2003-2006 Intel Corporation
ACPI: PCI Interrupt 0000:03:02.0[A] -> GSI 17 (level, low) -> IRQ 17
ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection
ipw2200: Detected geography ZZM (11 802.11bg channels, 0 802.11a channels)
root@slitaz:~# iwlist scanning
lo Interface doesn't support scanning.
dummy0 Interface doesn't support scanning.
eth0 Scan completed :
Cell 01 - Address: 00:1D:60:6F:26:37
ESSID:"
Protocol:IEEE 802.11bg
Mode:Master
Frequency:2.412 GHz (Channel 1)
Encryption key:off
Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 6 Mb/s; 9 Mb/s
11 Mb/s; 12 Mb/s; 18 Mb/s; 24 Mb/s; 36 Mb/s
48 Mb/s; 54 Mb/s
Quality=94/100 Signal level=-33 dBm
Extra: Last beacon: 93ms ago