Slitaz -- arm / kernel

Env:
gcc version 4.4.1 (Sourcery G++ 4.4-170)
linux-2.6.32.2-mini2440-20100113.tgz
1. tar xzvf linux-2.6.32.2-mini2440-20100113.tgz
cd linux-2.6.32.2/
2. cp config_mini2440_t35 .config
3. make xconfig
4. time make zImage
5. ls -l arch/arm/boot/zImage
-rwxrwxrwx 1 root root 2739608 Apr 21 16:46 arch/arm/boot/zImage

root@slitaz:/mnt/data/arm9/mini2440/linux-2.6.32.2# make xconfig
CHECK qt
sed < scripts/kconfig/lkc_proto.h > scripts/kconfig/lkc_defs.h 's/P(\([^,]*\),.*/#define \1 (\*\1_p)/'
HOSTCC scripts/kconfig/kconfig_load.o
/usr/bin/moc -i scripts/kconfig/qconf.h -o scripts/kconfig/qconf.moc
HOSTCXX scripts/kconfig/qconf.o
HOSTLD scripts/kconfig/qconf
scripts/kconfig/qconf arch/arm/Kconfig

root@slitaz:/mnt/data/arm9/mini2440/linux-2.6.32.2# time make zImage
[..]
LD vmlinux
SYSMAP System.map
SYSMAP .tmp_System.map
OBJCOPY arch/arm/boot/Image
Kernel: arch/arm/boot/Image is ready
AS arch/arm/boot/compressed/head.o
GZIP arch/arm/boot/compressed/piggy.gz
AS arch/arm/boot/compressed/piggy.o
CC arch/arm/boot/compressed/misc.o
LD arch/arm/boot/compressed/vmlinux
OBJCOPY arch/arm/boot/zImage
Kernel: arch/arm/boot/zImage is ready

real 6m14.729s
user 4m51.275s
sys 0m27.131s

root@slitaz:/mnt/data/arm9/mini2440/linux-2.6.32.2# ls -lh arch/arm/boot/zImage
-rwxrwxrwx 1 root root 2.6M Apr 21 16:46 arch/arm/boot/zImage
root@slitaz:/mnt/data/arm9/mini2440/linux-2.6.32.2# ls -l arch/arm/boot/zImage
-rwxrwxrwx 1 root root 2739608 Apr 21 16:46 arch/arm/boot/zImage

root@slitaz:/mnt/data/arm9/mini2440/linux-2.6.32.2# make help | tail -168
Architecture specific targets (arm):
* zImage - Compressed kernel image (arch/arm/boot/zImage)
Image - Uncompressed kernel image (arch/arm/boot/Image)
* xipImage - XIP kernel image, if configured (arch/arm/boot/xipImage)
uImage - U-Boot wrapped zImage
bootpImage - Combined zImage and initial RAM disk
(supply initrd image via make variable INITRD=)
install - Install uncompressed kernel
zinstall - Install compressed kernel
Install using (your) ~/bin/installkernel or
(distribution) /sbin/installkernel or
install to $(INSTALL_PATH) and run lilo

acs5k_defconfig - Build for acs5k
acs5k_tiny_defconfig - Build for acs5k_tiny
afeb9260_defconfig - Build for afeb9260
am200epdkit_defconfig - Build for am200epdkit
ams_delta_defconfig - Build for ams_delta
assabet_defconfig - Build for assabet
at91cap9adk_defconfig - Build for at91cap9adk
at91rm9200dk_defconfig - Build for at91rm9200dk
at91rm9200ek_defconfig - Build for at91rm9200ek
at91sam9260ek_defconfig - Build for at91sam9260ek
at91sam9261ek_defconfig - Build for at91sam9261ek
at91sam9263ek_defconfig - Build for at91sam9263ek
at91sam9g20ek_defconfig - Build for at91sam9g20ek
at91sam9rlek_defconfig - Build for at91sam9rlek
ateb9200_defconfig - Build for ateb9200
badge4_defconfig - Build for badge4
bcmring_defconfig - Build for bcmring
cam60_defconfig - Build for cam60
carmeva_defconfig - Build for carmeva
cerfcube_defconfig - Build for cerfcube
cm_x2xx_defconfig - Build for cm_x2xx
cm_x300_defconfig - Build for cm_x300
colibri_pxa270_defconfig - Build for colibri_pxa270
colibri_pxa300_defconfig - Build for colibri_pxa300
collie_defconfig - Build for collie
corgi_defconfig - Build for corgi
cpu9260_defconfig - Build for cpu9260
cpu9g20_defconfig - Build for cpu9g20
cpuat91_defconfig - Build for cpuat91
csb337_defconfig - Build for csb337
csb637_defconfig - Build for csb637
da830_omapl137_defconfig - Build for da830_omapl137
da850_omapl138_defconfig - Build for da850_omapl138
davinci_all_defconfig - Build for davinci_all
ebsa110_defconfig - Build for ebsa110
ecbat91_defconfig - Build for ecbat91
edb7211_defconfig - Build for edb7211
em_x270_defconfig - Build for em_x270
ep93xx_defconfig - Build for ep93xx
eseries_pxa_defconfig - Build for eseries_pxa
ezx_defconfig - Build for ezx
footbridge_defconfig - Build for footbridge
fortunet_defconfig - Build for fortunet
h3600_defconfig - Build for h3600
h5000_defconfig - Build for h5000
h7201_defconfig - Build for h7201
h7202_defconfig - Build for h7202
hackkit_defconfig - Build for hackkit
integrator_defconfig - Build for integrator
iop13xx_defconfig - Build for iop13xx
iop32x_defconfig - Build for iop32x
iop33x_defconfig - Build for iop33x
ixp2000_defconfig - Build for ixp2000
ixp23xx_defconfig - Build for ixp23xx
ixp4xx_defconfig - Build for ixp4xx
jornada720_defconfig - Build for jornada720
kafa_defconfig - Build for kafa
kb9202_defconfig - Build for kb9202
kirkwood_defconfig - Build for kirkwood
ks8695_defconfig - Build for ks8695
lart_defconfig - Build for lart
loki_defconfig - Build for loki
lpd270_defconfig - Build for lpd270
lpd7a400_defconfig - Build for lpd7a400
lpd7a404_defconfig - Build for lpd7a404
lubbock_defconfig - Build for lubbock
lusl7200_defconfig - Build for lusl7200
magician_defconfig - Build for magician
mainstone_defconfig - Build for mainstone
mini2440_defconfig - Build for mini2440
msm_defconfig - Build for msm
mv78xx0_defconfig - Build for mv78xx0
mx1ads_defconfig - Build for mx1ads
mx1_defconfig - Build for mx1
mx21_defconfig - Build for mx21
mx27_defconfig - Build for mx27
mx31pdk_defconfig - Build for mx31pdk
mx3_defconfig - Build for mx3
n770_defconfig - Build for n770
n8x0_defconfig - Build for n8x0
neocore926_defconfig - Build for neocore926
neponset_defconfig - Build for neponset
netwinder_defconfig - Build for netwinder
netx_defconfig - Build for netx
nhk8815_defconfig - Build for nhk8815
ns9xxx_defconfig - Build for ns9xxx
omap_2430sdp_defconfig - Build for omap_2430sdp
omap_3430sdp_defconfig - Build for omap_3430sdp
omap3_beagle_defconfig - Build for omap3_beagle
omap3_evm_defconfig - Build for omap3_evm
omap3_pandora_defconfig - Build for omap3_pandora
omap_4430sdp_defconfig - Build for omap_4430sdp
omap_apollon_2420_defconfig - Build for omap_apollon_2420
omap_generic_1510_defconfig - Build for omap_generic_1510
omap_generic_1610_defconfig - Build for omap_generic_1610
omap_generic_1710_defconfig - Build for omap_generic_1710
omap_generic_2420_defconfig - Build for omap_generic_2420
omap_h2_1610_defconfig - Build for omap_h2_1610
omap_h4_2420_defconfig - Build for omap_h4_2420
omap_innovator_1510_defconfig - Build for omap_innovator_1510
omap_innovator_1610_defconfig - Build for omap_innovator_1610
omap_ldp_defconfig - Build for omap_ldp
omap_osk_5912_defconfig - Build for omap_osk_5912
omap_perseus2_730_defconfig - Build for omap_perseus2_730
omap_zoom2_defconfig - Build for omap_zoom2
onearm_defconfig - Build for onearm
orion5x_defconfig - Build for orion5x
overo_defconfig - Build for overo
palmte_defconfig - Build for palmte
palmtt_defconfig - Build for palmtt
palmz71_defconfig - Build for palmz71
palmz72_defconfig - Build for palmz72
pcm027_defconfig - Build for pcm027
picotux200_defconfig - Build for picotux200
pleb_defconfig - Build for pleb
pnx4008_defconfig - Build for pnx4008
pxa168_defconfig - Build for pxa168
pxa255-idp_defconfig - Build for pxa255-idp
pxa3xx_defconfig - Build for pxa3xx
pxa910_defconfig - Build for pxa910
qil-a9260_defconfig - Build for qil-a9260
realview_defconfig - Build for realview
realview-smp_defconfig - Build for realview-smp
rpc_defconfig - Build for rpc
rx51_defconfig - Build for rx51
s3c2410_defconfig - Build for s3c2410
s3c6400_defconfig - Build for s3c6400
s5pc100_defconfig - Build for s5pc100
sam9_l9260_defconfig - Build for sam9_l9260
shannon_defconfig - Build for shannon
shark_defconfig - Build for shark
simpad_defconfig - Build for simpad
spitz_defconfig - Build for spitz
stmp378x_defconfig - Build for stmp378x
stmp37xx_defconfig - Build for stmp37xx
sx1_defconfig - Build for sx1
tct_hammer_defconfig - Build for tct_hammer
trizeps4_defconfig - Build for trizeps4
u300_defconfig - Build for u300
usb-a9260_defconfig - Build for usb-a9260
usb-a9263_defconfig - Build for usb-a9263
versatile_defconfig - Build for versatile
viper_defconfig - Build for viper
w90p910_defconfig - Build for w90p910
xcep_defconfig - Build for xcep
yl9200_defconfig - Build for yl9200

make V=0|1 [targets] 0 => quiet build (default), 1 => verbose build
make V=2 [targets] 2 => give reason for rebuild of target
make O=dir [targets] Locate all output files in "dir", including .config
make C=1 [targets] Check all c source with $CHECK (sparse by default)
make C=2 [targets] Force check of all c source with $CHECK

Execute "make" or "make all" to build all targets marked with [*]
For further info see the ./README file
root@slitaz:/mnt/data/arm9/mini2440/linux-2.6.32.2#
.

Slitaz -- arm / uboot

1.Env:
gcc version 4.4.1 (Sourcery G++ 4.4-170)
bootloader.tgz / u-boot-1.1.6 (mini2440)
2.tar xzvf bootloader.tgz
cd bootloader/u-boot-1.1.6/
3.add include/configs/100ask24x0.h
4.vi u-boot-1.1.6/Makefile
5.make distclean
6.make open24x0_config
7.make

----
3.add include/configs/100ask24x0.h

#if0
#define CONFIG_DRIVER_CS8900 1
#define CS8900_BASE 0x19000300
#define CS8900_BUS16 1
#endif
#if!defined(CONFIF_DRIVER_CS8900)
#define CONFIG_DRIVER_DM9000 1
#define CONFIG_DM9000_USE_16BIT 1
#define CONFIG_DM9000_BASE 0x20000000
#define DM9000_IO 0x20000000
#define DM_9000_DATA 0x20000004
#endif

4.vi u-boot-1.1.6/Makefile

line #218 del -lc
crosstool:gcc version 4.4.1 (Sourcery G++ 4.4-170)

root@slitaz:/mnt/data/arm9/mini2440/bootloader/u-boot-1.1.6/# diff -U0 Makefile-orig Makefile
--- Makefile-orig Wed Apr 1 10:51:24 2009
+++ Makefile Wed Apr 21 14:04:42 2010
@@ -218 +218 @@
-PLATFORM_LIBS += -L $(shell dirname `$(CC) $(CFLAGS) -print-libgcc-file-name`) -lgcc -lc -L/usr/local/arm/4.3.2/arm-none-linux-gnueabi/libc/armv4t/usr/lib
+PLATFORM_LIBS += -L $(shell dirname `$(CC) $(CFLAGS) -print-libgcc-file-name`) -lgcc -L/opt/sourcery/lib/gcc/arm-none-eabi/4.4.1/thumb

5. make distclean <== clean all && create .depend
6. make open24x0_config
Configuring for open24x0 board...

7. make
[..]
--start-group lib_generic/libgeneric.a board/open24x0/libopen24x0.a cpu/arm920t/libarm920t.a cpu/arm920t/s3c24x0/libs3c24x0.a lib_arm/libarm.a fs/cramfs/libcramfs.a fs/fat/libfat.a fs/fdos/libfdos.a fs/jffs2/libjffs2.a fs/reiserfs/libreiserfs.a fs/ext2/libext2fs.a net/libnet.a disk/libdisk.a rtc/librtc.a dtt/libdtt.a drivers/libdrivers.a drivers/nand/libnand.a drivers/nand_legacy/libnand_legacy.a drivers/usb/libusb.a drivers/sk98lin/libsk98lin.a common/libcommon.a --end-group -L /opt/sourcery/bin/../lib/gcc/arm-none-eabi/4.4.1/thumb -lgcc -L/opt/sourcery/lib/gcc/arm-none-eabi/4.4.1/thumb \
-Map u-boot.map -o u-boot
arm-linux-objcopy --gap-fill=0xff -O srec u-boot u-boot.srec
arm-linux-objcopy --gap-fill=0xff -O binary u-boot u-boot.bin
root@slitaz:/mnt/data/arm9/mini2440/bootloader/u-boot-1.1.6/# ls -l u-boot*
-rwxrwxrwx 1 root root 648704 Apr 21 14:05 u-boot
-rwxrwxrwx 1 root root 172028 Apr 21 14:05 u-boot.bin
-rwxrwxrwx 1 root root 148234 Apr 21 14:05 u-boot.map
-rwxrwxrwx 1 root root 516202 Apr 21 14:05 u-boot.srec
root@slitaz:/mnt/data/arm9/mini2440/bootloader/u-boot-1.1.6/# file u-boot
u-boot: ELF 32-bit LSB executable, ARM, version 1 (SYSV), statically linked, not stripped
root@slitaz:/mnt/data/arm9/mini2440/bootloader/u-boot-1.1.6/# file u-boot.bin
u-boot.bin: data
root@slitaz:/mnt/data/arm9/mini2440/bootloader/u-boot-1.1.6/# file u-boot.map
u-boot.map: ASCII assembler program text
root@slitaz:/mnt/data/arm9/mini2440/bootloader/u-boot-1.1.6/# file u-boot.srec
u-boot.srec: Motorola S-Record; binary data in text format
root@slitaz:/mnt/data/arm9/mini2440/bootloader/u-boot-1.1.6/# arm-linux-gcc -v
Using built-in specs.
Target: arm-none-eabi
Configured with: /scratch/dan/eabi-stable-respin/src/gcc-4.4/configure --build=i686-pc-linux-gnu --host=i686-pc-linux-gnu --target=arm-none-eabi --enable-threads --disable-libmudflap --disable-libssp --disable-libstdcxx-pch --enable-extra-sgxx-multilibs --with-gnu-as --with-gnu-ld --with-specs='%{!fcommon:%{!fno-common:-fno-common}} %{O2:%{!fno-remove-local-statics: -fremove-local-statics}} %{O*:%{O|O0|O1|O2|Os:;:%{!fno-remove-local-statics: -fremove-local-statics}}}' --enable-languages=c,c++ --disable-shared --disable-lto --with-newlib --with-pkgversion='Sourcery G++ 4.4-170' --with-bugurl=https://support.codesourcery.com/GNUToolchain/ --disable-nls --prefix=/opt/codesourcery --with-headers=yes --with-sysroot=/opt/codesourcery/arm-none-eabi --with-build-sysroot=/scratch/dan/eabi-stable-respin/install/arm-none-eabi --with-gmp=/scratch/dan/eabi-stable-respin/obj/host-libs-4.4-170-arm-none-eabi-i686-pc-linux-gnu/usr --with-mpfr=/scratch/dan/eabi-stable-respin/obj/host-libs-4.4-170-arm-none-eabi-i686-pc-linux-gnu/usr --with-ppl=/scratch/dan/eabi-stable-respin/obj/host-libs-4.4-170-arm-none-eabi-i686-pc-linux-gnu/usr --with-host-libstdcxx='-static-libgcc -Wl,-Bstatic,-lstdc++,-Bdynamic -lm' --with-cloog=/scratch/dan/eabi-stable-respin/obj/host-libs-4.4-170-arm-none-eabi-i686-pc-linux-gnu/usr --disable-libgomp --with-license=/scratch/dan/eabi-stable-respin/obj/host-libs-4.4-170-arm-none-eabi-i686-pc-linux-gnu/usr --with-csl-license-version=20100330 --with-csl-license-feature=gcc_ARM_EABI --enable-poison-system-directories --with-debug-prefix-map='/scratch/dan/eabi-stable-respin/install=/opt/codesourcery /scratch/dan/eabi-stable-respin/src/gcc-4.4=/opt/codesourcery/arm-none-eabi/src/gcc /scratch/dan/eabi-stable-respin/obj/gcc-4.4-170-arm-none-eabi-i686-pc-linux-gnu=/opt/codesourcery/arm-none-eabi/src/generated/gcc' --with-build-time-tools=/scratch/dan/eabi-stable-respin/install/arm-none-eabi/bin --with-build-time-tools=/scratch/dan/eabi-stable-respin/install/arm-none-eabi/bin
Thread model: single
gcc version 4.4.1 (Sourcery G++ 4.4-170)


Ref:
1. mini2440用戶手冊-2010-2-4.pdf
p388 ch-8.3 U-Boot

2. u-boot的Makefile分析
[http://blog.mcuol.com/User/lvembededsys/Article/4355_1.htm]

3. 逐行分析u-boot http://blog.csdn.net/huafulan/archive/2009/05/11/4169248.aspx

Slitaz -- arm / busybox

1.Env: arm-linux-gcc-4.3.2.tgz
busybox-1.13.3-mini2440.tgz
2.tar xzvf busybox-1.13.3-mini2440.tgz
cd busybox-1.13.3
3.cp fa.config .config
4.make gconfig
5.make

Trying libraries: crypt m
Library crypt is needed, can't exclude it (yet)
Library m is needed, can't exclude it (yet)
Final link with: crypt m

root@slitaz:~# arm-linux-gcc -v
Using built-in specs.
Target: arm-none-linux-gnueabi
Configured with: /scratch/julian/lite-respin/linux/src/gcc-4.3/configure --build=i686-pc-linux-gnu --host=i686-pc-linux-gnu --target=arm-none-linux-gnueabi --enable-threads --disable-libmudflap --disable-libssp --disable-libstdcxx-pch --with-gnu-as --with-gnu-ld --enable-languages=c,c++ --enable-shared --enable-symvers=gnu --enable-__cxa_atexit --with-pkgversion='Sourcery G++ Lite 2008q3-72' --with-bugurl=https://support.codesourcery.com/GNUToolchain/ --disable-nls --prefix=/opt/codesourcery --with-sysroot=/opt/codesourcery/arm-none-linux-gnueabi/libc --with-build-sysroot=/scratch/julian/lite-respin/linux/install/arm-none-linux-gnueabi/libc --with-gmp=/scratch/julian/lite-respin/linux/obj/host-libs-2008q3-72-arm-none-linux-gnueabi-i686-pc-linux-gnu/usr --with-mpfr=/scratch/julian/lite-respin/linux/obj/host-libs-2008q3-72-arm-none-linux-gnueabi-i686-pc-linux-gnu/usr --disable-libgomp --enable-poison-system-directories --with-build-time-tools=/scratch/julian/lite-respin/linux/install/arm-none-linux-gnueabi/bin --with-build-time-tools=/scratch/julian/lite-respin/linux/install/arm-none-linux-gnueabi/bin
Thread model: posix
gcc version 4.3.2 (Sourcery G++ Lite 2008q3-72)
root@slitaz:~#

root@slitaz:/mnt/data/arm9/mini2440/busybox-1.13.3# ls -l busybox*
-rwxrwxrwx 1 root root 634416 Apr 22 09:33 busybox
-rwxrwxrwx 1 root root 796307 Apr 22 09:33 busybox_unstripped
-rwxrwxrwx 1 root root 691492 Apr 22 09:33 busybox_unstripped.map
-rwxrwxrwx 1 root root 32926 Apr 22 09:33 busybox_unstripped.out
root@slitaz:/mnt/data/arm9/mini2440/busybox-1.13.3# file busybox
busybox: ELF 32-bit LSB executable, ARM, version 1 (SYSV), dynamically linked (uses shared libs), stripped
root@slitaz:/mnt/data/arm9/mini2440/busybox-1.13.3# file busybox_unstripped
busybox_unstripped: ELF 32-bit LSB executable, ARM, version 1 (SYSV), dynamically linked (uses shared libs), not stripped
root@slitaz:/mnt/data/arm9/mini2440/busybox-1.13.3# file busybox_unstripped.map
busybox_unstripped.map: ASCII assembler program text
root@slitaz:/mnt/data/arm9/mini2440/busybox-1.13.3# file busybox_unstripped.out
busybox_unstripped.out: ASCII C program text, with very long lines

root@slitaz:/mnt/data/arm9/mini2440/busybox-1.13.3# ls -l /usr/local/arm/4.3.2/arm-none-linux-gnueabi/libc/lib/libm*
-rwxr-xr-x 1 root root 743679 Nov 18 2008 /usr/local/arm/4.3.2/arm-none-linux-gnueabi/libc/lib/libm-2.8.so
-rwxr-xr-x 1 root root 22825 Nov 18 2008 /usr/local/arm/4.3.2/arm-none-linux-gnueabi/libc/lib/libmemusage.so
lrwxrwxrwx 1 root root 11 Apr 21 09:34 /usr/local/arm/4.3.2/arm-none-linux-gnueabi/libc/lib/libm.so.6 -> libm-2.8.so
root@slitaz:/mnt/data/arm9/mini2440/busybox-1.13.3# ls -l /usr/local/arm/4.3.2/arm-none-linux-gnueabi/libc/lib/libcrypt*
-rwxr-xr-x 1 root root 45563 Nov 18 2008 /usr/local/arm/4.3.2/arm-none-linux-gnueabi/libc/lib/libcrypt-2.8.so
lrwxrwxrwx 1 root root 15 Apr 21 09:34 /usr/local/arm/4.3.2/arm-none-linux-gnueabi/libc/lib/libcrypt.so.1 -> libcrypt-2.8.so
root@slitaz:/mnt/data/arm9/mini2440/busybox-1.13.3#

gcc version 4.3.2 (Sourcery G++ Lite 2008q3-72)
[..]
Library crypt is needed, can't exclude it (yet)

LD util-linux/volume_id/built-in.o
CC util-linux/volume_id/get_devname.o
CC util-linux/volume_id/util.o
CC util-linux/volume_id/volume_id.o
AR util-linux/volume_id/lib.a
LINK busybox_unstripped
Trying libraries: crypt m
Library crypt is needed, can't exclude it (yet)
Library m is needed, can't exclude it (yet)
Final link with: crypt m

real 1m1.509s
user 0m46.332s
sys 0m6.750s

Slitaz -- arm / qemu

Extract from:
Tiny qemu arm system with a DirectFB interface
[http://free-electrons.com/community/demos/qemu-arm-directfb/]

A tiny embedded Linux system running on the qemu arm emulator, with a DirectFB interface, everything in 2.1 MB (including the kernel)!

Overview
This demo embedded Linux system has the following features:

* Very easy to run demo, just 1 file to download and 1 command line to type!
* Runs on qemu (easy to get for most GNU/Linux distributions), emulating an ARM Versatile PB board.
* Available through a single file (kernel and root filesystem), sizing only 2.1 MB!
* DirectFB graphical user interface.
* Demonstrates the capabilities of qemu, the Linux kernel, BusyBox, DirectFB, and shows the benefits of system size and boot time reduction techniques as advertised and supported by the CE Linux Forum.
* License: GNU GPL for root filesystem scripts. Each software component has its own license.
[..]

http://free-electrons.com/pub/qemu/demos/arm/directfb/1.0/vmlinuz-qemu-arm-2.6.20

root@slitaz:~/Downloads# date
二  4月 20 15:00:40 UTC 2010
root@slitaz:~/Downloads# ls -lh vmlinuz-qemu-arm-2.6.20
-rw-r--r--    1 root     root         2.1M Apr 20 08:54 vmlinuz-qemu-arm-2.6.20
root@slitaz:~/Downloads# ls -l /usr/bin/qemu-system-arm 
-rwxr-xr-x    1 root     root      2164440 Apr 20 11:08 /usr/bin/qemu-system-arm

root@slitaz:~/Downloads# tazpkg list-files qemu | head -8

Installed files with : qemu
================================================================================
/usr/bin/qemu
/usr/bin/qemu-img
/usr/bin/qemu-nbd
/usr/bin/qemu-system-x86_64
/usr/share/qemu/bamboo.dtb
root@slitaz:~/Downloads# ./run_qemu &
[1] 1684
root@slitaz:~/Downloads# ps ax | grep qemu
1685 root qemu-system-arm -M versatilepb -m 16 -kernel vmlinuz-qemu-arm-2.6.20 -append clocksource=pit quiet rw
root@slitaz:~/Downloads#
.

Slitaz -- skyeye

root@slitaz:~# skyeye -h
SkyEye 1.3.0
Bug report: skyeye-simulator@googlegroups.com
Usage: skyeye [options] -e program [program args]
Default mode is STANDALONE mode
------------------------------------------------------------------
Options:
-e exec-file the (ELF executable format)kernel file name.
-l load_address,load_address_mask
Load ELF file to another address, not its entry.
-b specify the data type is big endian when non "-e" option.
-d in GDB Server mode (can be connected by GDB).
-c config-file the skyeye configure file name.
-h The SkyEye command options, and ARCHs and CPUs simulated.
------------------------------------------------------------------
SkyEye is an Open Source project under GPL. All rights of different parts or modules are reserved by their author. Any modification or redistributions of SkyEye should note remove or modify the annoucement of SkyEye copyright.
Get more information about it, please visit the homepage http://www.skyeye.org.
Type "help" to get command list.
(skyeye)help
No commands match ''. Possibilties are:
log-pc : record the every pc to log file.

disassemble : Disassemble the given address.

cov-state : show code coverage state.

cov-off : turn off code coverage switch.

cov-on : turn on code coverage switch.

pmon : enable the performance monitor.

delete-bp : List all the breakpoint.

list-bp : List all the breakpoint.

break : set breakpoint for an address.

show-step : Show the steps of current processor.

x : display memory value at the address.
info : show information for various objects.
load-conf : load a config file and parse it for SkyEye.
list-machines : List all the supported machines for SkyEye.
list-options : List all the available options for SkyEye.
show-map : Show the current memory map for the machine.
show-pref : Show the current preference for SkyEye.
list-modules : List all the loaded module.
start : start simulator.
stepi : step into .
continue : Continue the running of interrupted simulator.
stop : Stop the running of simulator.
run : Start the simulator.
q : Quit SkyEye
quit : Quit SkyEye
ls : Synonym for `list'
? : Synonym for `help'.

help : List all the category for the commands.

help : List all the category for the commands.

(skyeye)q
No valid arch option is provided.
Destroy threads.
Unload all modules.
exit.
root@slitaz:~#

====
root@slitaz:/tmp/skyeye-testsuite-1.3.0_rc1/uClinux/at91/uclinux_cs8900a# skyeye -e linux
SkyEye is an Open Source project under GPL. All rights of different parts or modules are reserved by their author. Any modification or redistributions of SkyEye should note remove or modify the annoucement of SkyEye copyright.
Get more information about it, please visit the homepage http://www.skyeye.org.
Type "help" to get command list.
(skyeye)start
arch: arm
cpu info: armv3, arm7tdmi, 41007700, fff8ff00, 0
In do_mach_option, mach info: name at91, mach_init addr 0xb5e2b770

ethmod num=1, mac addr=0:0:0:0:0:0, hostip=10.0.0.1
uart_mod:3, desc_in:, desc_out:, converter:
In create_uart_console
Warning: locale not supported by Xlib, locale set to C
Loaded ROM ./romfs.img
SKYEYE: use arm7100 mmu ops
exec file "linux"'s format is elf32-i386.
load section .init: addr = 0x01000000 size = 0x0000a000.
load section .text: addr = 0x0100a000 size = 0x000e1cd0.
load section .data: addr = 0x010ec000 size = 0x0000a434.
not load section .bss: addr = 0x010f6440 size = 0x000222c0 .
In SIM_start, Set PC to the address 0x1000000

(skyeye)run
(running)

====
Connecting to slitaz:56832
Linux version 2.4.27-uc1 (skyeyeuser@debian) (gcc version 2.95.3 20010315 (release)(ColdFire patches - 20010318 from http://fiddes.net/coldfire/)(uClinux XIP and shared lib patches from http://www.snapgear.com/)) #3 Tue Aug 9 18:57:29 CST 2005
Processor: Atmel AT91M40xxx revision 0
Architecture: EB01
On node 0 totalpages: 1024
zone(0): 0 pages.
zone(1): 1024 pages.
zone(2): 0 pages.
Kernel command line: root=/dev/rom0
Calibrating delay loop... 15.82 BogoMIPS
Memory: 4MB = 4MB total
Memory: 2916KB available (903K code, 178K data, 40K init)
Dentry cache hash table entries: 512 (order: 0, 4096 bytes)
Inode cache hash table entries: 512 (order: 0, 4096 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 1024 (order: 0, 4096 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
Atmel USART driver version 0.99
ttyS0 at 0xfffd0000 (irq = 2) is a builtin Atmel APB USART
ttyS1 at 0xfffcc000 (irq = 3) is a builtin Atmel APB USART
Blkmem copyright 1998,1999 D. Jeff Dionne
Blkmem copyright 1998 Kenneth Albanowski
Blkmem 1 disk images:
0: 1400000-1512BFF [VIRTUAL 1400000-1512BFF] (RO)
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
Cirrus Logic CS8900A driver for Linux (V0.02)
eth0: CS8900A rev D detected
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 512 bind 512)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
VFS: Mounted root (romfs filesystem) readonly.
Shell invoked to run file: /etc/rc
Command: hostname GDB-ARMulator
Command: /bin/expand /etc/ramfs.img /dev/ram0
Command: mount -t proc proc /proc
mount: /etc/mtab: Read-only file system
Command: mount -t ext2 /dev/ram0 /var
mount: /etc/mtab: Read-only file system
Command: mkdir /var/tmp
Command: mkdir /var/log
Command: mkdir /var/run
Command: mkdir /var/lock
Command: mkdir /var/empty
Command: cat /etc/motd
Welcome to

          ____ _  _
         /  __| ||_|                 
    _   _| |  | | _ ____  _   _  _  _ 
   | | | | |  | || |  _ \| | | |\ \/ /
   | |_| | |__| || | | | | |_| |/    \
   |  ___\____|_||_|_| |_|\____|\_/\_/
   | |
   |_|

GDB/ARMulator support by 
For further information check:
http://www.uclinux.org/

Command: /bin/ifconfig eth0 up 10.0.0.2
Execution Finished, Exiting

Sash command shell (version 1.1.1)
/> ls
bin
dev
etc
home
lib
mnt
proc
sbin
tmp
usr
var
/> help
cd         [dirname]
sleep      seconds
chgrp      gid filename ...
chmod      mode filename ...
chown      uid filename ...
cmp        filename1 filename2
cp         srcname ... destname
df         [file-system]
echo       [args] ...
exec       filename [args]
exit       
free       
help       
hexdump    [-s pos] filename
hostname   [hostname]
kill       [-sig] pid ...
ln         [-s] srcname ... destname
ls         [-lidC] filename ...
mkdir      dirname ...
mknod      filename type major minor
more       filename ...
mount      [-t type] devname dirname
mv         srcname ... destname
printenv   [name]
pwd        
pid        
quit       
rm         filename ...
rmdir      dirname ...
setenv     name value
source     filename
sync       
touch      filename ...
umask      [mask]
umount     filename
ps         
cat        filename ...
date       date [MMDDhhmm[YYYY]]
/> date
Thu Jan  1 00:01:54 1970

/> free
        total:    used:    free:  shared: buffers:  cached:
Mem:   2985984  1077248  1908736        0   155648   266240
Swap:        0        0        0
/> df
Total Kbytes: 1096
Free  Kbytes: 0
Total  nodes: 0
Free   nodes: 0
/> 

Slitaz -- roadmap / ARM port

Roadmap http://labs.slitaz.org/projects/roadmap/distro
4.0

Due in 351 days (03/26/2011)

SliTaz GNU/Linux 4.0

0%

0 closed (0%) 2 open (100%)
Roadmap 4.0

SliTaz roadmap to Stable Version 4.0 - Release Schedule: Spring 2011
Timeline

* April 2010 -> August 2010: Add well tested packages from wok-undigest, split existing packages, remove dependencies.
* ...

ARM port

SliTaz 4.0 will have an ARM port to target new ARM powered netbooks and other portable devices.
Gettext support in all SliTaz tools and utilities

All SliTaz related tools such as tazpkg, tazlito or GTK boxes will be gettextized and translated into as many languages as possible.
Related issues

* Task #301: Up gcc to 4.4.3 or higher (New toolchain)
* Task #305: xorg security vulnerability

----
http://forum.slitaz.org/index.php/discussion/918/slitaz-on-pda

English-General•? slitaz on pda ?

*
o lmart o April 4 o Permalink

Has anyone replaced WinCE on HP iPAQ h1910 with SliTaz?
*
o ernia o April 4 o Permalink

i don't think that slitaz works on arm architecture too...
i think that debian works on arm, search for debian armel
*
o monz o April 4 o Permalink

There was/is a project to put Linux on the HP iPAQ 1910:

http://www.handhelds.org/moin/moin.cgi/HpIpaqH1910

I have one too, and have wanted to try this but never got around to it, because it seems complicated enough (involves burning a new BIOS etc.) that i keep putting it off.
*
o jozee o April 5 o Permalink

Question asked at the right time :-)
We are working on porting SliTaz to arm. So, fun is about to begin.
http://forum.slitaz.org/index.php/discussion/comment/4662/#Comment_4662
.

Slitaz -- control box

root@slitaz:/home/tux# hwsetup usage

SliTaz Setup configuration

Usage: hwsetup [command] [--option]

Commands:
usage Print this short usage.
printer Paraller and USB Printer setup.
scanner USB Scanner setup.
webcam Integrated and USB webcam setup.
camera Digital Camera setup.
bluetooth Bluetooth setup.
3g-modem 3g-modem setup.
firewall start/stop firewall.
nvidia Nvidia (non-free/free) setup.
ati ATI (non-free/free) setup.

Options:
--non-free install non-free packages (nvidia, ati).
--suggested auto-install optional dependencies.
--confirm confirm before installing optional dependencies

root@slitaz:/home/tux#

http://labs.slitaz.org/wiki/setup
Hwsetup
Overview

This tool extends tazhw to make hardware setup easier. The following devices are considered: printer, scanner, camera, webcam, 3g-modem,bluetooth, firewall, nvidia and ati. Download here. Learn more

USAGE:
tazhw setup usage

For GUI use tazhwbox:
tazhw box

SYNTAX:
tazhw setup [device]

* To set up printer:
tazhw setup printer

* To set up scanner:
tazhw setup scanner

* To set up webcam:
tazhw setup webcam

* To set up digital camera:
tazhw setup camera

* To set up 3g-modem:
tazhw setup 3g-modem

* To set up bluetooth:
tazhw setup bluetooth

* To set up firewall:
tazhw setup firewall

* To set up nvidia (free drivers):
tazhw setup nvidia

* To set up nvidia (non-free drivers):
tazhw setup nvidia --non-free

* To set up ati radeon (free drivers):
tazhw setup ati

* To set up ati radeon (non-free catalyst drivers):
tazhw setup ati --non-free

* To auto-install all optional dependencies:
tazhw setup printer --suggested

* To confirm each optional dependency before installing:
tazhw setup printer --confirm

Slitaz -- slitaz-installer

slitaz-installer & menu.lst title

Env: slitaz-3.0.iso / slitaz-3.0-firefox.iso / packages.3.0.iso

root@slitaz:~# cat /boot/grub/menu.lst
# /boot/grub/menu.lst: GRUB boot loader configuration.
#

# By default, boot the first entry.
default 0

# Boot automatically after 8 secs.
timeout 8

# Change the colors.
color yellow/brown light-green/black

# For booting SliTaz from : /dev/hda2
#
title SliTaz GNU/Linux (cooking) (Kernel vmlinuz-2.6.30.6-slitaz)
root (hd0,1)
kernel /boot/vmlinuz-2.6.30.6-slitaz root=/dev/hda2

----
/usr/bin/slitaz-installer

line no. 596

title SliTaz GNU/Linux (cooking) (Kernel $KERNEL)


[..]
cat > $TARGET_ROOT/boot/grub/menu.lst << _EOF_
# /boot/grub/menu.lst: GRUB boot loader configuration.
#

# By default, boot the first entry.
default 0

# Boot automatically after 8 secs.
timeout 8

# Change the colors.
color yellow/brown light-green/black

# For booting SliTaz from : $TARGET_DEV
#
title SliTaz GNU/Linux (cooking) (Kernel $KERNEL)
root $GRUB_ROOT
[..]

SliTaz GNU/Linux 3.0 release

28 Mar 2010 - SliTaz GNU/Linux 3.0 release

All of the SliTaz team are proud to announce the release of the SliTaz GNU/Linux 3.0 operating system. It's simpler, faster, customizable, mightier and yet incredibly tiny. The new SliTaz stable version is now out after one year of development.

The core desktop provides a fully featured desktop powered by Xorg 7.4, Openbox, LXDE components and home made tools. It lets you easily connect to the Internet to surf the web with the Midori web browser, listen to music or manage your pictures.

The default core system fits into a 30 MB ISO image and LiveCD flavors start at 8 MB. This stable version has been built by a new toolchain including GCC 4.4.1 and uses the Linux kernel 2.6.30.6. You can read the full Releases Notes for more information and download a LiveCD image from the SliTaz mirrors.

http://www.slitaz.org/en/doc/releases/3.0/relnotes.en.htmlhttp://www.slitaz.org/en/doc/releases/3.0/relnotes.en.html

Releases notes

* Overview.
* Supported Hardware.
* LiveCD Flavors.
* Kernel and toolchain.
* UTF-8 support.
* Xorg server.
* HD Install and LiveUSB.
* Software Packages.
* Core Desktop.
* Security.
* From 2.0 to 3.0.
* People of the Project.

Overview

Welcome to SliTaz 3.0! Small, fast, easy to use and customize, the new SliTaz stable version is now out after one year of development.

* Boot scripts rewritten and faster (super-fast booting)
* All home-made boxes improved (tazctrlbox, tazhw, wifibox, burnbox, mountbox, netbox, serverbox, installer)
* Switch to Xorg from Xvesa
* Switch to Midori as the default web browser
* Better hardware support - wifi cards, webcams, 3G-modems, printers, scanners
* Better themes and desktop integration
* Faster virtualization with lguest
* SliTaz pro: OpenERP, LAMP, GLPI and more
* Easier to customize LiveCD and LiveUSB (tazlitobox and tazusbbox)
* Tazpkg supports new features including the conversion of deb/rpm/arch/slackware/ipk packages to Slitaz native format
* Packages are now automatically built by a build bot (Tazbb)
* More contributors and stronger community
* 900 packages added to the database and many updates
* More than 2800 commits by contributors

Technical support is provided to users via the mailing list and the official forum: forum.slitaz.org
Supported Hardware

SliTaz GNU/Linux supports all machines based on the i486 or x86 Intel compatible processors. A minimum 192MB of memory is recommended to use the core LiveCD. 80MB is needed for the "slitaz-loram" flavor and 16MB for the "slitaz-loram-cdrom" flavor.

With the slitaz-loram flavor, the system is less responsive, but allows you to graphically install SliTaz on very old machines with limited resources. Once installed, SliTaz works well with a minimum of 16MB memory, but forget about using Firefox to surf the web - you'll have to use the text based 'links' for example.

SliTaz 3.0 provides all needed drivers and tools such as 915resolution to have support for a wide range of netbooks (Eeepc, HP mini, Aspire One, etc).
LiveCD Flavors

SliTaz GNU/Linux is distributed as a bootable LiveCD. You can use the LiveCD as a normal system or you can graphically install Slitaz to the hard drive. Installing/upgrading Slitaz retains your previous system's settings, applications and documents.

The LiveCD can also be customised and easily rebuilt both graphically or from the command line. Install your own custom set of packages, or simply use one of the preset flavors on the mirror. Then simply generate your distribution with the "Tazlito" tool.

The ISO image now uses a 'hybrid' system: it can also be copied onto an USB stick without formating it (using dd).
Kernel and toolchain

SliTaz 3.0 comes with a new but very well tested 2.6.30.6 Linux kernel and a complete new build toolchain from which the whole system has been built. The 2.6.30.6 Linux kernel is separated into several linux-packages for supporting additional drivers and features. This time we have also built-in some more drivers to have a faster kernel boot.

The new toolchain comprises of: Binutils 2.19.1, GCC 4.4.1, Glibc 2.10.1
UTF-8 support
With this release, the Slitaz community can enjoy full UTF-8 support. SliTaz uses standard PO files for the translation of all SliTaz related tools, boxes and utilities. With better internationalization support (russian, portuguese, chinese, and many more), contributors can now use graphical tools such as poedit to make translations using GNU gettext standards. The labs also have an i18n project to easily upload files to be included in the distribution. The locale packs have more translated application messages for the core system and some extra packages for applications such as Gimp, Abiword, Gnumeric, etc.
Xorg server

SliTaz now uses the Xorg X window system (although we will always try to provide a Xvesa flavor). With the tazx utility you can reconfigure Xorg and select the correct driver for your card. The xorg server comes with the vesa driver by default which powers most cards; although you may still need to manually configure your xorg.conf to some degree if you install some of the other drivers.
HD install and LiveUSB

The installation is fully automated and can be done graphically or in text mode. The slitaz installer now lets you use a separate partition for /home, configure the root password and chose the default user login. The installer also now supports installation from a LiveUSB session.

Full USB install is also supported using rootdelay=10 as a kernel argument (in GRUB menu.lst). The root delay ensures the Kernel has detected the device before mounting it on / (root).
Software Packages

SliTaz 3.0 has around 2300 packages in the database. A wide variety of packages have been commited and the Tazpkg package manager can now convert deb/rpm/arch/slackware/ipk packages to Slitaz native format (.tazpkg). A lot of time was also spent maintaining professional grade software such as OpenERP, MySQL, GLPI.

On the update side, mostly all the packages have been updated, including the kernel, toolchain, Xorg (7.4), GTK and QT. The package format has also changed to support lzma for better compression and faster downloads. Packages are also checked by Tazwok to ensure the FHS is followed and packages are now built automatically by the SliTaz Build Bot: bb.slitaz.org
Core Desktop

A lot of attention has been paid the the core desktop. All applications are well integrated and a special SliTaz theme (icons, Openbox, GTK) has been created.

The core desktop provides a selection of multi-use packages for surfing the web, listening to music, audio editing, image manipulation and developing or burning to optical media. It's just one click in the application menu to find installed software by category.
Security

Slitaz is more secure and robust now and the firewall rules have been updated. A firewall can be installed using the graphical tazhw box, and serverbox can help to maintain the installed firewall. Mountbox can manage crypto devices with devmapper and the crypt setup tools allow encryption of block devices.
From 2.0 to 3.0

The SliTaz GNU/linux installer offers an update function allowing you to upgrade from a '2.0' to '3.0' version. To upgrade the system you first need to boot the 'Stable' LiveCD, launch the installer, select upgrade and then specify the partition containing the system that you want to update. The installer will then clean out the system and reinstall all the packages not present on the CD from the mirror. When this has finished you can reboot with your new version of SliTaz.

Note that the installer will keep a copy of the list of packages and a complete archive of the /etc directory (etc.tar.gz) in /var/lib/slitaz-install.

To upgrade a 2.0 to 3.0 it is also possible to use the package manager "Tazpkg" via the 'set-release' function, but beware this is not yet proven and may require some manual intervention. If you choose this method you must first install 'tazpkg' from 3.0, because the package format has changed.
People of the Project

SliTaz is proud to be an international community project. The people of the project are the ones who develop the distribution, correct the website, develop the HG repositories and write the official documentation. Passing through Switzerland, France, Brazil, Quebec, China, India, Russia, England, and the U.S.

* Christophe Lincoln
* Pascal Bellard
* Eric Joseph-Alexandre
* Paul Issott
* Julien Rabier
* Rohit Joshi
* Claudinei Pereira
* Dominique Corbex
* Mallory Mollo
* Mike D. Smith
* Allan Pinto
* Matthew Sheets
* Liu Peng
* Alice Ayanami
* F. Steiner
* Chen Yufei
* Jesse Lehman
* Bill Nagel
* Michael Dupont
* Franco Azzano
* Fabrice Thiroux
* Eduardo Suarez-Santana
* Tom Frankland
* Sandeep Srinivasa
* David Ozura
* Pierre Romillon
* ...

The project also wishes to thank all the reviewers, testers, hackers and users who have taken the time to help advance the distribution.

Slitaz -- iasl / acpi=ht / early_ioremap_debug -8

tux@slitaz:~$ cat /proc/cmdline 
root=/dev/sda1 acpi=ht early_ioremap_debug
tux@slitaz:~$ cat /var/log/dmesg.log 
map+0x61/0x15b
 [] early_ioremap+0xd/0xf
 [] __acpi_map_table+0x14/0x16
 [] acpi_os_map_memory+0x18/0x1a
 [] acpi_tb_verify_table+0x20/0x49
 [] acpi_get_table_with_size+0x53/0xa1
 [] ? acpi_parse_mcfg+0x0/0xfa
 [] ? generic_swap+0x0/0x27
 [] acpi_table_parse+0x4a/0x6f
 [] __pci_mmcfg_init+0x157/0x2e3
 [] ? dmi_get_year+0x30/0x4e
 [] ? pci_sanity_check+0x25/0x95
 [] ? pci_arch_init+0x0/0x53
 [] pci_mmcfg_early_init+0xd/0xf
 [] pci_arch_init+0x19/0x53
 [] do_one_initcall+0x4c/0x13a
 [] kernel_init+0x106/0x157
 [] ? kernel_init+0x0/0x157
 [] kernel_thread_helper+0x7/0x10
00000400 + ffe00000
early_iounmap(ffe00400, 0000003c) [0]
Pid: 1, comm: swapper Not tainted 2.6.30.6-slitaz #1
Call Trace:
 [] ? printk+0xf/0x11
 [] early_iounmap+0x81/0x119
 [] ? acpi_parse_mcfg+0x0/0xfa
 [] ? generic_swap+0x0/0x27
 [] __acpi_unmap_table+0x10/0x12
 [] early_acpi_os_unmap_memory+0x11/0x13
 [] acpi_table_parse+0x66/0x6f
 [] __pci_mmcfg_init+0x157/0x2e3
 [] ? dmi_get_year+0x30/0x4e
 [] ? pci_sanity_check+0x25/0x95
 [] ? pci_arch_init+0x0/0x53
 [] pci_mmcfg_early_init+0xd/0xf
 [] pci_arch_init+0x19/0x53
 [] do_one_initcall+0x4c/0x13a
 [] kernel_init+0x106/0x157
 [] ? kernel_init+0x0/0x157
 [] kernel_thread_helper+0x7/0x10
PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
PCI: Not using MMCONFIG.
PCI: Using configuration type 1 for base access
bio: create slab  at 0
ACPI: Interpreter disabled.
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
pci 0000:00:02.0: reg 10 64bit mmio: [0xfe400000-0xfe7fffff]
pci 0000:00:02.0: reg 18 64bit mmio: [0xd0000000-0xdfffffff]
pci 0000:00:02.0: reg 20 io port: [0xec00-0xec07]
pci 0000:00:1a.0: reg 20 io port: [0xe880-0xe89f]
pci 0000:00:1a.7: reg 10 32bit mmio: [0xfeafa000-0xfeafa3ff]
pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.7: PME# disabled
pci 0000:00:1b.0: reg 10 64bit mmio: [0xfeaf4000-0xfeaf7fff]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: PME# disabled
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: PME# disabled
pci 0000:00:1d.0: reg 20 io port: [0xe800-0xe81f]
pci 0000:00:1d.1: reg 20 io port: [0xe480-0xe49f]
pci 0000:00:1d.2: reg 20 io port: [0xe400-0xe41f]
pci 0000:00:1d.3: reg 20 io port: [0xe080-0xe09f]
pci 0000:00:1d.7: reg 10 32bit mmio: [0xfeaf8000-0xfeaf83ff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
pci 0000:00:1f.2: reg 10 io port: [0xe000-0xe007]
pci 0000:00:1f.2: reg 14 io port: [0xdc00-0xdc03]
pci 0000:00:1f.2: reg 18 io port: [0xd880-0xd887]
pci 0000:00:1f.2: reg 1c io port: [0xd800-0xd803]
pci 0000:00:1f.2: reg 20 io port: [0xd480-0xd48f]
pci 0000:00:1f.2: reg 24 io port: [0xd400-0xd40f]
pci 0000:00:1f.3: reg 10 64bit mmio: [0xfeaf2000-0xfeaf20ff]
pci 0000:00:1f.3: reg 20 io port: [0x400-0x41f]
pci 0000:02:00.0: reg 10 64bit mmio: [0xfebf0000-0xfebfffff]
pci 0000:02:00.0: PME# supported from D3hot D3cold
pci 0000:02:00.0: PME# disabled
pci 0000:00:1c.1: bridge 32bit mmio: [0xfeb00000-0xfebfffff]
pci 0000:00:1e.0: transparent bridge
pci 0000:00:1f.0: PIIX/ICH IRQ router [8086:3a18]
pci 0000:00:02.0: PCI->APIC IRQ transform: INT A -> IRQ 16
pci 0000:00:1a.0: PCI->APIC IRQ transform: INT A -> IRQ 16
pci 0000:00:1a.7: PCI->APIC IRQ transform: INT C -> IRQ 18
pci 0000:00:1b.0: PCI->APIC IRQ transform: INT A -> IRQ 22
pci 0000:00:1c.0: PCI->APIC IRQ transform: INT A -> IRQ 17
pci 0000:00:1c.1: PCI->APIC IRQ transform: INT B -> IRQ 16
pci 0000:00:1d.0: PCI->APIC IRQ transform: INT A -> IRQ 23
pci 0000:00:1d.1: PCI->APIC IRQ transform: INT B -> IRQ 19
pci 0000:00:1d.2: PCI->APIC IRQ transform: INT C -> IRQ 18
pci 0000:00:1d.3: PCI->APIC IRQ transform: INT D -> IRQ 16
pci 0000:00:1d.7: PCI->APIC IRQ transform: INT A -> IRQ 23
pci 0000:00:1f.2: PCI->APIC IRQ transform: INT B -> IRQ 19
pci 0000:00:1f.3: PCI->APIC IRQ transform: INT C -> IRQ 18
pci 0000:02:00.0: PCI->APIC IRQ transform: INT A -> IRQ 17
pnp: PnP ACPI: disabled
pci 0000:00:1c.0: PCI bridge, secondary bus 0000:01
pci 0000:00:1c.0:   IO window: disabled
pci 0000:00:1c.0:   MEM window: disabled
pci 0000:00:1c.0:   PREFETCH window: disabled
pci 0000:00:1c.1: PCI bridge, secondary bus 0000:02
pci 0000:00:1c.1:   IO window: disabled
pci 0000:00:1c.1:   MEM window: 0xfeb00000-0xfebfffff
pci 0000:00:1c.1:   PREFETCH window: disabled
pci 0000:00:1e.0: PCI bridge, secondary bus 0000:03
pci 0000:00:1e.0:   IO window: disabled
pci 0000:00:1e.0:   MEM window: disabled
pci 0000:00:1e.0:   PREFETCH window: disabled
pci 0000:00:1c.0: setting latency timer to 64
pci 0000:00:1c.1: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
pci_bus 0000:02: resource 1 mem: [0xfeb00000-0xfebfffff]
pci_bus 0000:03: resource 3 io:  [0x00-0xffff]
pci_bus 0000:03: resource 4 mem: [0x000000-0xffffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
NET: Registered protocol family 1
platform rtc_cmos: registered platform RTC device (no PNP device found)
highmem bounce pool size: 64 pages
fuse init (API version 7.11)
SGI XFS with security attributes, large block/inode numbers, no debug enabled
msgmni has been set to 1731
alg: No test for stdrng (krng)
io scheduler noop registered
io scheduler deadline registered (default)
pci 0000:00:02.0: Boot video device
Switched to NOHz mode on CPU #1
Switched to NOHz mode on CPU #0
pci 0000:00:1d.7: EHCI: BIOS handoff failed (BIOS bug?) 01010001
pcieport-driver 0000:00:1c.0: setting latency timer to 64
pcieport-driver 0000:00:1c.1: setting latency timer to 64
early_ioremap(7dd90390, 0000006c) [0] => Pid: 1, comm: swapper Not tainted 2.6.3 .6-slitaz #1
Call Trace:
 [] ? printk+0xf/0x11
 [] __early_ioremap+0x61/0x15b
 [] ? kobject_put+0x37/0x3c
 [] early_ioremap+0xd/0xf
 [] __acpi_map_table+0x14/0x16
 [] acpi_os_map_memory+0x18/0x1a
 [] acpi_tb_verify_table+0x20/0x49
 [] acpi_get_table_with_size+0x53/0xa1
 [] acpi_get_table+0x10/0x15
 [] acpi_processor_init+0x26/0xe3
 [] ? acpi_processor_init+0x0/0xe3
 [] do_one_initcall+0x4c/0x13a
 [] kernel_init+0x106/0x157
 [] ? kernel_init+0x0/0x157
 [] kernel_thread_helper+0x7/0x10
00000390 + ffe00000
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Non-volatile memory driver v1.3
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
brd: module loaded
loop: module loaded
Uniform Multi-Platform E-IDE driver
ide_generic: please use "probe_mask=0x3f" module parameter for probing all legac  ISA IDE ports
Probing IDE interface ide0...
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
ide1 at 0x170-0x177,0x376 on irq 15
ide-gd driver 1.18
ide-cd driver 5.00
Driver 'sd' needs updating - please use bus_type methods
Driver 'sr' needs updating - please use bus_type methods
ata_piix 0000:00:1f.2: version 2.13
ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
ata_piix 0000:00:1f.2: setting latency timer to 64
scsi0 : ata_piix
scsi1 : ata_piix
ata1: SATA max UDMA/133 cmd 0xe000 ctl 0xdc00 bmdma 0xd480 irq 19
ata2: SATA max UDMA/133 cmd 0xd880 ctl 0xd800 bmdma 0xd488 irq 19
e1000e: Intel(R) PRO/1000 Network Driver - 0.3.3.4-k4
e1000e: Copyright (c) 1999-2008 Intel Corporation.
pcnet32.c:v1.35 21.Apr.2008 tsbogend@alpha.franken.de
e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
e100: Copyright(c) 1999-2006 Intel Corporation
ThunderLAN driver v1.15a
TLAN: 0 devices installed, PCI: 0  EISA: 0
ns83820.c: National Semiconductor DP83820 10/100/1000 driver.
PPP generic driver version 2.4.2
PPP Deflate Compression module registered
PPP BSD Compression module registered
PPP MPPE Compression module registered
NET: Registered protocol family 24
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky 
dmfe: Davicom DM9xxx net driver, version 1.36.4 (2002-01-17)
winbond-840.c:v1.01-e (2.4 port) Sep-11-2006  Donald Becker 
  http://www.scyld.com/network/drivers.html
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1a.7: setting latency timer to 64
ehci_hcd 0000:00:1a.7: EHCI Host Controller
ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.7: debug port 1
ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfeafa000
ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfeaf8000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 8 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1a.0: setting latency timer to 64
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000e880
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000e800
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000e480
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000e400
usb usb6: configuration #1 chosen from 1 choice
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.3: setting latency timer to 64
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000e080
usb usb7: configuration #1 chosen from 1 choice
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
input: PC Speaker as /devices/platform/pcspkr/input/input0
cpuidle: using governor ladder
cpuidle: using governor menu
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
TCP cubic registered
NET: Registered protocol family 17
NET: Registered protocol family 15
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
Using IPI No-Shortcut mode
------------[ cut here ]------------
WARNING: at arch/x86/mm/ioremap.c:603 check_early_ioremap_leak+0x48/0x5c()
Hardware name: ValueStar
Debug warning: early ioremap leak of 1 areas detected.
Modules linked in:
Pid: 1, comm: swapper Not tainted 2.6.30.6-slitaz #1
Call Trace:
 [] warn_slowpath_common+0x65/0x7c
 [] ? check_early_ioremap_leak+0x48/0x5c
 [] ? check_early_ioremap_leak+0x0/0x5c
 [] warn_slowpath_fmt+0x24/0x27
 [] check_early_ioremap_leak+0x48/0x5c
 [] do_one_initcall+0x4c/0x13a
 [] kernel_init+0x106/0x157
 [] ? kernel_init+0x0/0x157
 [] kernel_thread_helper+0x7/0x10
---[ end trace 426f01cc83ab8016 ]---
please boot with early_ioremap_debug and report the dmesg.
usb 4-1: new low speed USB device using uhci_hcd and address 2
usb 4-1: configuration #1 chosen from 1 choice
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1:1. /input/input1
logitech 0003:046D:C517.0001: input: USB HID v1.10 Keyboard [Logitech USB Receiv r] on usb-0000:00:1d.0-1/input0
logitech 0003:046D:C517.0002: fixing up Logitech keyboard report descriptor
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1:1. /input/input2
logitech 0003:046D:C517.0002: input,hiddev96: USB HID v1.10 Mouse [Logitech USB  eceiver] on usb-0000:00:1d.0-1/input1
ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.01: SATA link down (SStatus 0 SControl 300)
ata1.00: ATA-7: ST3320620AS, 3.AAK, max UDMA/133
ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access     ATA      ST3320620AS      3.AA PQ: 0 ANSI: 5
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] 625142448 512-byte hardware sectors: (320 GB/298 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda: sda1 sda2 sda3 < sda5 sda6 > sda4
sd 0:0:0:0: [sda] Attached SCSI disk
ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.01: SATA link down (SStatus 0 SControl 300)
ata2.00: ATAPI: ATAPI   iHAS324   Y, BL1X, max UDMA/100
ata2.00: configured for UDMA/100
scsi 1:0:0:0: CD-ROM            ATAPI    iHAS324   Y      BL1X PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
sr 1:0:0:0: Attached scsi generic sg1 type 5
EXT3-fs: INFO: recovery required on readonly filesystem.
EXT3-fs: write access will be enabled during recovery.
kjournald starting.  Commit interval 5 seconds
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with writeback data mode.
VFS: Mounted root (ext3 filesystem) readonly on device 8:1.
Freeing unused kernel memory: 328k freed
EXT3 FS on sda1, internal journal
tux@slitaz:~$ 

Slitaz -- iasl / acpi=ht -7

root=/dev/sda1 acpi=ht
please boot with early_ioremap_debug and report the dmesg.

/usr/src/linux-2.6.30.6-slitaz/arch/x86/mm/ioremap.c

[..]line#590 
static int __init check_early_ioremap_leak(void)
{
 int count = 0;
 int i;

 for (i = 0; i < FIX_BTMAPS_SLOTS; i++)
  if (prev_map[i])
   count++;

 if (!count)  return 0;
 WARN(1, KERN_WARNING
        "Debug warning: early ioremap leak of %d areas detected.\n",
  count);
 printk(KERN_WARNING
  "please boot with early_ioremap_debug and report the dmesg.\n");

 return 1;
}
late_initcall(check_early_ioremap_leak);
[..]


Extract From 

http://ericxiao.cublog.cn/
linux引導分析 
http://blog.chinaunix.net/u1/51562/showart_1018436.html

[.. #512]
Setup_arch()  --à  early_ioremap_init()代碼如下:

void __init early_ioremap_init(void)
{
         pmd_t *pmd;
 
         if (early_ioremap_debug)

                   printk(KERN_INFO "early_ioremap_init()\n");
 

         pmd = early_ioremap_pmd(fix_to_virt(FIX_BTMAP_BEGIN));

         /*在這裡會將FIX_BTMAP_BEGIN 段的頁面表固定使用bm_pte*/
         memset(bm_pte, 0, sizeof(bm_pte));

         pmd_populate_kernel(&init_mm, pmd, bm_pte);
 
         /*

          * The boot-ioremap range spans multiple pmds, for which
          * we are not prepared:
          */

         if (pmd != early_ioremap_pmd(fix_to_virt(FIX_BTMAP_END))) {
                   WARN_ON(1);

                   printk(KERN_WARNING "pmd %p != %p\n",

                          pmd, early_ioremap_pmd(fix_to_virt(FIX_BTMAP_END)));

                   printk(KERN_WARNING "fix_to_virt(FIX_BTMAP_BEGIN): %08lx\n",
                            fix_to_virt(FIX_BTMAP_BEGIN));

                   printk(KERN_WARNING "fix_to_virt(FIX_BTMAP_END):   %08lx\n",
                            fix_to_virt(FIX_BTMAP_END));
 

                   printk(KERN_WARNING "FIX_BTMAP_END:       %d\n", FIX_BTMAP_END);

                   printk(KERN_WARNING "FIX_BTMAP_BEGIN:     %d\n",
                          FIX_BTMAP_BEGIN);
         }
}
上面的這段代碼,使FIX_BTMAP_BEGIN為起始地址對應的一個PMD對應映射的地址區間.即固定映射到bm_pte.
細心的讀者可以發現了.從FIX_BTMAP_BEGIN開始的一個PMD映射區間對應就是永久內存映射的線性地址段.沒錯,就是它.
一般說來,永久內存映射地址段只在一個PMD範圍內.若有超出一個PMD.則打印出警告信息.
[..]

Slitaz -- iasl / acpi -6

dmidecode VS amideco

tux@slitaz:~/temp$ sudo flashrom -r ms7428vh.bin
flashrom v0.9.1-r873
No coreboot table found.
Found chipset "Intel ICH10", enabling flash write... OK.
This chipset supports the following protocols: FWH,SPI.
Calibrating delay loop... OK.
Found chip "Winbond W25x80" (1024 KB, SPI) at physical address 0xfff00000.
===
This flash part has status UNTESTED for operations: ERASE
Please email a report to flashrom@flashrom.org if any of the above operations
work correctly for you with this flash part. Please include the flashrom
output with the additional -V option for all operations you tested (-V, -rV,
-wV, -EV), and mention which mainboard or programmer you tested. Thanks for your help!
===
Reading flash... done.
tux@slitaz:~/temp$ sudo amideco ms7428vh.bin -d -x

-=AmiBIOSDeco, version 0.31e (Linux)=-

FileLength      : 100000 (1048576 bytes)
FileName        : ms7428vh.bin

        AMIBIOS information:
Version         : 0800
Packed Data     : 50000 (327680 bytes)
Start           : A0014
Packed Offset   : A0014
Offset          : 0
Released        : 17 November 2008
DirName         : ms7428vh.---
Operation mkdir() is permitted
+------------------------------------------------------------------------------+
| Class.Instance (Name)        Packed --->  Expanded      Compression   Offset |
+------------------------------------------------------------------------------+
WARNING: Ignoring unknown compression flag (0x90) for part id 11

Total Sections  : 19
tux@slitaz:~/temp$ ls -l ms7428vh.---/
-rw-r--r--    1 root     root        35375 Mar  9 20:09 amibody.04
-rw-r--r--    1 root     root         2560 Mar  9 20:09 amibody.06
-rw-r--r--    1 root     root         2096 Mar  9 20:09 amibody.08
-rw-r--r--    1 root     root            8 Mar  9 20:09 amibody.0c
-rw-r--r--    1 root     root        25363 Mar  9 20:09 amibody.0e
-rw-r--r--    1 root     root        24106 Mar  9 20:09 amibody.10
-rw-r--r--    1 root     root        65535 Mar  9 20:09 amibody.11
-rw-r--r--    1 root     root        16965 Mar  9 20:09 amibody.18
-rw-r--r--    1 root     root         4868 Mar  9 20:09 amibody.19
-rw-r--r--    1 root     root         9890 Mar  9 20:09 amibody.1a
-rw-r--r--    1 root     root       413787 Mar  9 20:09 amibody.1b
-rw-r--r--    1 root     root        25471 Mar  9 20:09 amibody.21
-rw-r--r--    1 root     root         1360 Mar  9 20:09 amibody.2b
-rw-r--r--    1 root     root          104 Mar  9 20:09 amibody.80
-rw-r--r--    1 root     root          340 Mar  9 20:09 amibody.f0
-rw-r--r--    1 root     root            0 Mar  9 20:09 amipci_00.20
-rw-r--r--    1 root     root        65024 Mar  9 20:09 amipci_01.20
-rw-r--r--    1 root     root        56832 Mar  9 20:09 amipci_02.20
-rw-r--r--    1 root     root        65536 Mar  9 20:09 amipci_03.20
tux@slitaz:~/temp$ hexdump -C ms7428vh.---/amibody.06 
00000000  5f 41 4d 49 44 4d 49 5f  03 02 01 01 00 b6 06 00  |_AMIDMI_........|
00000010  00 18 00 00 01 02 00 f0  03 0f 90 de 29 4d 00 00  |............)M..|
00000020  00 00 03 07 01 01 ff ff  4e 45 43 00 30 30 30 31  |........NEC.0001|
00000030  2f 34 36 36 41 30 30 30  32 00 31 31 2f 31 37 2f  |/466A0002.11/17/|
00000040  32 30 30 38 00 00 01 1b  01 00 01 02 03 04 ff ff  |2008............|
00000050  ff ff ff ff ff ff ff ff  ff ff ff ff ff ff 06 05  |................|
00000060  06 4e 45 43 00 56 61 6c  75 65 53 74 61 72 00 20  |.NEC.ValueStar. |
00000070  20 00 31 32 33 34 35 36  37 38 39 00 20 00 20 00  | .123456789. . .|
00000080  00 02 0f 02 00 01 02 03  04 05 09 06 03 00 0a 00  |................|
00000090  4e 45 43 00 4d 53 2d 37  34 32 38 56 48 00 56 48  |NEC.MS-7428VH.VH|
000000a0  00 20 00 20 00 20 00 00  03 15 03 00 01 0f 02 03  |. . . ..........|
000000b0  04 03 03 03 03 00 00 00  00 00 01 00 00 4e 45 43  |.............NEC|
000000c0  00 20 00 20 00 20 00 00  04 28 04 00 01 03 01 02  |. . . ...(......|
000000d0  00 00 00 00 00 00 00 00  03 8d 00 00 d0 07 00 00  |................|
000000e0  00 04 05 00 06 00 ff ff  04 05 06 00 00 00 00 00  |................|
000000f0  53 4f 43 4b 45 54 37 37  35 20 4d 2f 42 00 20 20  |SOCKET775 M/B.  |
00000100  20 20 20 20 20 20 20 20  20 20 20 20 20 20 20 00  |               .|
00000110  20 20 20 20 20 20 20 20  20 20 20 20 20 20 20 20  |                |
*
00000140  20 20 20 20 00 20 00 20  00 20 00 00 07 13 05 00  |    . . . ......|
00000150  01 80 01 00 00 00 00 01  00 01 00 00 03 01 07 49  |...............I|
00000160  6e 74 65 72 6e 61 6c 00  00 07 13 06 00 01 81 01  |nternal.........|
00000170  00 00 00 00 01 00 01 00  00 05 05 07 49 6e 74 65  |............Inte|
00000180  72 6e 61 6c 00 00 05 18  07 00 03 04 03 03 0a 01  |rnal............|
00000190  00 00 05 02 04 08 00 09  00 0a 00 0b 00 04 00 00  |................|
000001a0  06 0c 08 00 01 01 3c 00  05 1d 1d 00 44 49 4d 4d  |......<.....DIMM|
000001b0  31 20 4d 2f 42 00 00 06  0c 09 00 01 23 3c 00 05  |1 M/B.......#<..|
000001c0  1d 1d 00 44 49 4d 4d 32  20 4d 2f 42 00 00 06 0c  |...DIMM2 M/B....|
000001d0  0a 00 01 45 3c 00 05 1d  1d 00 44 49 4d 4d 33 20  |...E<.....DIMM3 |
000001e0  4d 2f 42 00 00 06 0c 0b  00 01 67 3c 00 05 1d 1d  |M/B.......g<....|
000001f0  00 44 49 4d 4d 34 20 4d  2f 42 00 00 08 09 0c 00  |.DIMM4 M/B......|
00000200  01 00 02 0f 0d 20 00 4b  65 79 62 6f 61 72 64 20  |..... .Keyboard |
00000210  00 00 08 09 0d 00 01 00  02 1f 1d 20 00 4d 69 63  |........... .Mic|
00000220  20 49 6e 20 00 00 08 09  0e 00 01 00 02 1f 1d 20  | In ........... |
00000230  00 4c 69 6e 65 20 49 6e  20 00 00 08 09 0f 00 01  |.Line In .......|
00000240  00 02 1f 1d 20 00 4c 69  6e 65 20 4f 75 74 20 00  |.... .Line Out .|
00000250  00 08 09 10 00 01 00 02  0b 1f 20 00 4e 65 74 77  |.......... .Netw|
00000260  6f 72 6b 20 00 00 08 09  11 00 01 00 02 12 10 20  |ork ........... |
00000270  00 50 6f 72 74 20 31 20  00 00 08 09 12 00 01 00  |.Port 1 ........|
00000280  02 12 10 20 00 50 6f 72  74 20 30 20 00 00 08 09  |... .Port 0 ....|
00000290  13 00 01 00 02 12 10 20  00 50 6f 72 74 20 32 20  |....... .Port 2 |
000002a0  00 00 08 09 14 00 01 00  02 12 10 20 00 50 6f 72  |........... .Por|
000002b0  74 20 33 20 00 00 08 09  15 00 01 00 02 12 10 20  |t 3 ........... |
000002c0  00 50 6f 72 74 20 34 20  00 00 08 09 16 00 01 00  |.Port 4 ........|
000002d0  02 12 10 20 00 50 6f 72  74 20 35 20 00 00 08 09  |... .Port 5 ....|
000002e0  17 00 01 ff 02 12 10 4a  55 53 42 31 20 4d 2f 42  |.......JUSB1 M/B|
000002f0  20 00 50 6f 72 74 20 31  31 20 00 00 08 09 18 00  | .Port 11 ......|
00000300  01 ff 02 12 10 4a 55 53  42 31 20 4d 2f 42 20 00  |.....JUSB1 M/B .|
00000310  50 6f 72 74 20 31 30 20  00 00 08 09 19 00 01 ff  |Port 10 ........|
00000320  02 00 00 4a 55 53 42 32  20 4d 2f 42 20 00 50 6f  |...JUSB2 M/B .Po|
00000330  72 74 20 39 20 00 00 08  09 1a 00 01 00 02 07 1c  |rt 9 ...........|
00000340  20 00 4d 6f 6e 69 74 6f  72 20 00 00 08 09 1b 00  | .Monitor ......|
00000350  01 ff 02 00 ff 53 41 54  41 31 20 4d 2f 42 20 00  |.....SATA1 M/B .|
00000360  20 00 00 08 09 1c 00 01  ff 02 00 ff 53 41 54 41  | ...........SATA|
00000370  32 20 4d 2f 42 20 00 20  00 00 09 0d 1d 00 01 06  |2 M/B . ........|
00000380  05 03 03 01 00 06 01 50  43 49 31 00 00 09 0d 1e  |.......PCI1.....|
00000390  00 01 06 05 03 03 02 00  06 01 50 43 49 32 00 00  |..........PCI2..|
000003a0  09 0d 1f 00 01 a5 0d 03  03 03 00 04 04 50 43 49  |.............PCI|
000003b0  5f 45 31 00 00 09 0d 20  00 01 a5 08 03 03 04 00  |_E1.... ........|
000003c0  04 04 50 43 49 5f 45 32  00 00 0a 06 21 00 85 01  |..PCI_E2....!...|
000003d0  42 72 6f 61 64 63 6f 6d  20 35 37 38 34 00 00 0b  |Broadcom 5784...|
000003e0  05 22 00 05 20 00 20 00  24 42 49 4f 53 45 30 31  |.".. . .$BIOSE01|
000003f0  30 30 31 30 31 30 30 31  31 30 32 31 30 33 31 31  |0010100110210311|
00000400  31 00 20 00 20 00 00 10  0f 23 00 03 03 03 00 00  |1. . ....#......|
00000410  40 00 fe ff 04 00 00 00  13 0f 24 00 00 00 00 00  |@.........$.....|
00000420  00 00 00 00 23 00 00 00  00 11 1b 25 00 23 00 fe  |....#......%.#..|
00000430  ff ff ff ff ff ff ff 09  ff 01 02 13 44 00 20 03  |............D. .|
00000440  03 04 05 06 44 49 4d 4d  31 20 4d 2f 42 00 20 00  |....DIMM1 M/B. .|
00000450  20 20 20 20 20 20 20 20  20 20 20 20 00 20 20 20  |            .   |
00000460  20 20 20 20 20 20 20 20  20 00 20 20 20 20 20 20  |         .      |
00000470  20 20 20 20 20 20 00 20  20 20 20 20 20 20 20 20  |      .         |
00000480  20 20 20 20 20 20 20 20  20 20 20 00 00 14 13 26  |           ....&|
00000490  00 00 00 00 00 00 00 00  00 25 00 24 00 01 00 00  |.........%.$....|
000004a0  00 00 11 1b 27 00 23 00  fe ff ff ff ff ff ff ff  |....'.#.........|
000004b0  09 ff 01 02 13 44 00 20  03 03 04 05 06 44 49 4d  |.....D. .....DIM|
000004c0  4d 32 20 4d 2f 42 00 20  00 20 20 20 20 20 20 20  |M2 M/B. .       |
000004d0  20 20 20 20 20 00 20 20  20 20 20 20 20 20 20 20  |     .          |
000004e0  20 20 00 20 20 20 20 20  20 20 20 20 20 20 20 00  |  .            .|
000004f0  20 20 20 20 20 20 20 20  20 20 20 20 20 20 20 20  |                |
00000500  20 20 20 20 00 00 14 13  28 00 00 00 00 00 00 00  |    ....(.......|
00000510  00 00 27 00 24 00 01 00  00 00 00 11 1b 29 00 23  |..'.$........).#|
00000520  00 fe ff ff ff ff ff ff  ff 09 ff 01 02 13 44 00  |..............D.|
00000530  20 03 03 04 05 06 44 49  4d 4d 33 20 4d 2f 42 00  | .....DIMM3 M/B.|
00000540  20 00 20 20 20 20 20 20  20 20 20 20 20 20 00 20  | .            . |
00000550  20 20 20 20 20 20 20 20  20 20 20 00 20 20 20 20  |           .    |
00000560  20 20 20 20 20 20 20 20  00 20 20 20 20 20 20 20  |        .       |
00000570  20 20 20 20 20 20 20 20  20 20 20 20 20 00 00 14  |             ...|
00000580  13 2a 00 00 00 00 00 00  00 00 00 29 00 24 00 01  |.*.........).$..|
00000590  00 00 00 00 11 1b 2b 00  23 00 fe ff ff ff ff ff  |......+.#.......|
000005a0  ff ff 09 ff 01 02 13 44  00 20 03 03 04 05 06 44  |.......D. .....D|
000005b0  49 4d 4d 34 20 4d 2f 42  00 20 00 20 20 20 20 20  |IMM4 M/B. .     |
000005c0  20 20 20 20 20 20 20 00  20 20 20 20 20 20 20 20  |       .        |
000005d0  20 20 20 20 00 20 20 20  20 20 20 20 20 20 20 20  |    .           |
000005e0  20 00 20 20 20 20 20 20  20 20 20 20 20 20 20 20  | .              |
000005f0  20 20 20 20 20 20 00 00  14 13 2c 00 00 00 00 00  |      ....,.....|
00000600  00 00 00 00 2b 00 24 00  01 00 00 00 00 10 0f 2d  |....+.$........-|
00000610  00 03 05 03 00 04 00 00  fe ff 01 00 00 00 13 0f  |................|
00000620  2e 00 00 00 00 00 ff 03  00 00 2d 00 01 00 00 11  |..........-.....|
00000630  1b 2f 00 2d 00 fe ff 08  00 08 00 00 84 01 00 01  |./.-............|
00000640  02 09 00 10 21 00 03 04  05 06 42 49 4f 53 31 20  |....!.....BIOS1 |
00000650  4d 2f 42 00 20 00 20 20  20 20 20 20 20 20 20 20  |M/B. .          |
00000660  20 20 00 20 00 20 00 20  20 20 20 20 20 20 20 20  |  . . .         |
00000670  20 20 20 20 20 20 20 20  20 20 20 00 00 14 13 30  |           ....0|
00000680  00 00 00 00 00 ff 03 00  00 2f 00 2e 00 01 00 00  |........./......|
00000690  00 00 20 14 31 00 00 00  00 00 00 00 00 00 00 00  |.. .1...........|
000006a0  00 00 00 00 00 00 00 00  88 06 00 00 5a 5a 00 00  |............ZZ..|
000006b0  7f 04 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
000006c0  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
*
00000a00
tux@slitaz:~/temp$ 


tux@slitaz:~/temp$ sudo dmidecode --dump-bin dmidump.bin
# dmidecode 2.10
SMBIOS 2.4 present.
# Writing 1702 bytes to dmidump.bin.
# Writing 31 bytes to dmidump.bin.
tux@slitaz:~/temp$ ls -l dmidump.bin
-rw-r--r--    1 root     root         1734 Mar  9 19:59 dmidump.bin
tux@slitaz:~/temp$ hexdump -C dmidump.bin
00000000  5f 53 4d 5f f9 1f 02 04  84 00 00 00 00 00 00 00  |_SM_............|
00000010  5f 44 4d 49 5f 44 a6 06  20 00 00 00 34 00 24 00  |_DMI_D.. ...4.$.|
00000020  00 18 00 00 01 02 00 f0  03 0f 90 de 29 4d 00 00  |............)M..|
00000030  00 00 03 07 01 01 ff ff  4e 45 43 00 30 30 30 31  |........NEC.0001|
00000040  2f 34 36 36 41 30 30 30  32 00 31 31 2f 31 37 2f  |/466A0002.11/17/|
00000050  32 30 30 38 00 00 01 1b  01 00 01 02 03 04 ff ff  |2008............|
00000060  ff ff ff ff ff ff ff ff  ff ff ff ff ff ff 01 05  |................|
00000070  06 4e 45 43 00 56 61 6c  75 65 53 74 61 72 00 20  |.NEC.ValueStar. |
00000080  20 00 31 32 33 34 35 36  37 38 39 00 20 00 20 00  | .123456789. . .|
00000090  00 02 0f 02 00 01 02 03  04 05 09 06 03 00 0a 00  |................|
000000a0  4e 45 43 00 4d 53 2d 37  34 32 38 56 48 00 56 48  |NEC.MS-7428VH.VH|
000000b0  00 20 00 20 00 20 00 00  03 15 03 00 01 0f 02 03  |. . . ..........|
000000c0  04 03 03 03 03 00 00 00  00 00 01 00 00 4e 45 43  |.............NEC|
000000d0  00 20 00 20 00 20 00 00  04 28 04 00 01 03 02 02  |. . . ...(......|
000000e0  7a 06 01 00 ff fb eb bf  03 8d 0b 01 f0 0a f0 0a  |z...............|
000000f0  41 01 05 00 06 00 ff ff  04 05 06 02 02 02 04 00  |A...............|
00000100  53 4f 43 4b 45 54 37 37  35 20 4d 2f 42 00 49 6e  |SOCKET775 M/B.In|
00000110  74 65 6c 20 20 20 20 20  20 20 20 20 20 20 20 00  |tel            .|
00000120  50 65 6e 74 69 75 6d 28  52 29 20 44 75 61 6c 2d  |Pentium(R) Dual-|
00000130  43 6f 72 65 20 20 43 50  55 20 20 20 20 20 20 45  |Core  CPU      E|
00000140  36 33 30 30 20 20 40 20  32 2e 38 30 47 48 7a 20  |6300  @ 2.80GHz |
00000150  20 20 20 20 00 20 00 20  00 20 00 00 07 13 05 00  |    . . . ......|
00000160  01 80 01 40 00 40 00 01  00 01 00 00 04 04 07 49  |...@.@.........I|
00000170  6e 74 65 72 6e 61 6c 00  00 07 13 06 00 01 81 01  |nternal.........|
00000180  00 08 00 08 01 00 01 00  00 05 05 07 49 6e 74 65  |............Inte|
00000190  72 6e 61 6c 00 00 05 18  07 00 03 04 03 03 0a 01  |rnal............|
000001a0  00 00 05 02 04 08 00 09  00 0a 00 0b 00 04 00 00  |................|
000001b0  06 0c 08 00 01 01 00 00  05 8b 8b 00 44 49 4d 4d  |............DIMM|
000001c0  31 20 4d 2f 42 00 00 06  0c 09 00 01 23 00 00 05  |1 M/B.......#...|
000001d0  7f 7f 00 44 49 4d 4d 32  20 4d 2f 42 00 00 06 0c  |...DIMM2 M/B....|
000001e0  0a 00 01 45 00 00 05 7f  7f 00 44 49 4d 4d 33 20  |...E......DIMM3 |
000001f0  4d 2f 42 00 00 06 0c 0b  00 01 67 00 00 05 7f 7f  |M/B.......g.....|
00000200  00 44 49 4d 4d 34 20 4d  2f 42 00 00 08 09 0c 00  |.DIMM4 M/B......|
00000210  01 00 02 0f 0d 20 00 4b  65 79 62 6f 61 72 64 20  |..... .Keyboard |
00000220  00 00 08 09 0d 00 01 00  02 1f 1d 20 00 4d 69 63  |........... .Mic|
00000230  20 49 6e 20 00 00 08 09  0e 00 01 00 02 1f 1d 20  | In ........... |
00000240  00 4c 69 6e 65 20 49 6e  20 00 00 08 09 0f 00 01  |.Line In .......|
00000250  00 02 1f 1d 20 00 4c 69  6e 65 20 4f 75 74 20 00  |.... .Line Out .|
00000260  00 08 09 10 00 01 00 02  0b 1f 20 00 4e 65 74 77  |.......... .Netw|
00000270  6f 72 6b 20 00 00 08 09  11 00 01 00 02 12 10 20  |ork ........... |
00000280  00 50 6f 72 74 20 31 20  00 00 08 09 12 00 01 00  |.Port 1 ........|
00000290  02 12 10 20 00 50 6f 72  74 20 30 20 00 00 08 09  |... .Port 0 ....|
000002a0  13 00 01 00 02 12 10 20  00 50 6f 72 74 20 32 20  |....... .Port 2 |
000002b0  00 00 08 09 14 00 01 00  02 12 10 20 00 50 6f 72  |........... .Por|
000002c0  74 20 33 20 00 00 08 09  15 00 01 00 02 12 10 20  |t 3 ........... |
000002d0  00 50 6f 72 74 20 34 20  00 00 08 09 16 00 01 00  |.Port 4 ........|
000002e0  02 12 10 20 00 50 6f 72  74 20 35 20 00 00 08 09  |... .Port 5 ....|
000002f0  17 00 01 ff 02 12 10 4a  55 53 42 31 20 4d 2f 42  |.......JUSB1 M/B|
00000300  20 00 50 6f 72 74 20 31  31 20 00 00 08 09 18 00  | .Port 11 ......|
00000310  01 ff 02 12 10 4a 55 53  42 31 20 4d 2f 42 20 00  |.....JUSB1 M/B .|
00000320  50 6f 72 74 20 31 30 20  00 00 08 09 19 00 01 ff  |Port 10 ........|
00000330  02 00 00 4a 55 53 42 32  20 4d 2f 42 20 00 50 6f  |...JUSB2 M/B .Po|
00000340  72 74 20 39 20 00 00 08  09 1a 00 01 00 02 07 1c  |rt 9 ...........|
00000350  20 00 4d 6f 6e 69 74 6f  72 20 00 00 08 09 1b 00  | .Monitor ......|
00000360  01 ff 02 00 ff 53 41 54  41 31 20 4d 2f 42 20 00  |.....SATA1 M/B .|
00000370  20 00 00 08 09 1c 00 01  ff 02 00 ff 53 41 54 41  | ...........SATA|
00000380  32 20 4d 2f 42 20 00 20  00 00 09 0d 1d 00 01 06  |2 M/B . ........|
00000390  05 03 03 01 00 06 01 50  43 49 31 00 00 09 0d 1e  |.......PCI1.....|
000003a0  00 01 06 05 03 03 02 00  06 01 50 43 49 32 00 00  |..........PCI2..|
000003b0  09 0d 1f 00 01 a5 0d 03  03 03 00 04 04 50 43 49  |.............PCI|
000003c0  5f 45 31 00 00 09 0d 20  00 01 a5 08 03 03 04 00  |_E1.... ........|
000003d0  04 04 50 43 49 5f 45 32  00 00 0a 06 21 00 85 01  |..PCI_E2....!...|
000003e0  42 72 6f 61 64 63 6f 6d  20 35 37 38 34 00 00 0b  |Broadcom 5784...|
000003f0  05 22 00 05 20 00 20 00  24 42 49 4f 53 45 30 31  |.".. . .$BIOSE01|
00000400  30 30 31 30 31 30 30 31  31 30 32 31 30 33 31 31  |0010100110210311|
00000410  31 00 20 00 20 00 00 10  0f 23 00 03 03 03 00 00  |1. . ....#......|
00000420  40 00 fe ff 04 00 00 00  13 0f 24 00 00 00 00 00  |@.........$.....|
00000430  ff ff 1f 00 23 00 01 00  00 11 1b 25 00 23 00 fe  |....#......%.#..|
00000440  ff 40 00 40 00 00 08 09  00 01 02 01 80 00 2a 04  |.@.@..........*.|
00000450  03 04 05 06 44 49 4d 4d  31 20 4d 2f 42 00 20 00  |....DIMM1 M/B. .|
00000460  20 20 20 20 20 20 20 20  20 20 20 20 00 31 34 43  |            .14C|
00000470  43 35 44 45 35 20 20 20  20 00 55 6e 6b 6e 6f 77  |C5DE5    .Unknow|
00000480  6e 20 20 20 20 20 00 39  39 30 35 34 30 33 2d 30  |n     .9905403-0|
00000490  31 31 2e 41 30 33 4c 46  20 20 20 00 00 14 13 26  |11.A03LF   ....&|
000004a0  00 00 00 00 00 ff ff 1f  00 25 00 24 00 01 00 00  |.........%.$....|
000004b0  00 00 11 1b 27 00 23 00  fe ff ff ff ff ff 00 00  |....'.#.........|
000004c0  09 00 01 02 13 04 00 00  00 03 04 05 06 44 49 4d  |.............DIM|
000004d0  4d 32 20 4d 2f 42 00 20  00 20 20 20 20 20 20 20  |M2 M/B. .       |
000004e0  20 20 20 20 20 00 20 20  20 20 20 20 20 20 20 20  |     .          |
000004f0  20 20 00 20 20 20 20 20  20 20 20 20 20 20 20 00  |  .            .|
00000500  20 20 20 20 20 20 20 20  20 20 20 20 20 20 20 20  |                |
00000510  20 20 20 20 00 00 14 13  28 00 00 00 00 00 00 00  |    ....(.......|
00000520  00 00 27 00 24 00 01 00  00 00 00 11 1b 29 00 23  |..'.$........).#|
00000530  00 fe ff ff ff ff ff 00  00 09 00 01 02 13 04 00  |................|
00000540  00 00 03 04 05 06 44 49  4d 4d 33 20 4d 2f 42 00  |......DIMM3 M/B.|
00000550  20 00 20 20 20 20 20 20  20 20 20 20 20 20 00 20  | .            . |
00000560  20 20 20 20 20 20 20 20  20 20 20 00 20 20 20 20  |           .    |
00000570  20 20 20 20 20 20 20 20  00 20 20 20 20 20 20 20  |        .       |
00000580  20 20 20 20 20 20 20 20  20 20 20 20 20 00 00 14  |             ...|
00000590  13 2a 00 00 00 00 00 00  00 00 00 29 00 24 00 01  |.*.........).$..|
000005a0  00 00 00 00 11 1b 2b 00  23 00 fe ff ff ff ff ff  |......+.#.......|
000005b0  00 00 09 00 01 02 13 04  00 00 00 03 04 05 06 44  |...............D|
000005c0  49 4d 4d 34 20 4d 2f 42  00 20 00 20 20 20 20 20  |IMM4 M/B. .     |
000005d0  20 20 20 20 20 20 20 00  20 20 20 20 20 20 20 20  |       .        |
000005e0  20 20 20 20 00 20 20 20  20 20 20 20 20 20 20 20  |    .           |
000005f0  20 00 20 20 20 20 20 20  20 20 20 20 20 20 20 20  | .              |
00000600  20 20 20 20 20 20 00 00  14 13 2c 00 00 00 00 00  |      ....,.....|
00000610  00 00 00 00 2b 00 24 00  01 00 00 00 00 10 0f 2d  |....+.$........-|
00000620  00 03 05 03 00 04 00 00  fe ff 01 00 00 00 13 0f  |................|
00000630  2e 00 00 00 00 00 ff 03  00 00 2d 00 01 00 00 11  |..........-.....|
00000640  1b 2f 00 2d 00 fe ff 08  00 08 00 00 84 0a 00 01  |./.-............|
00000650  02 09 00 10 21 00 03 04  05 06 42 49 4f 53 31 20  |....!.....BIOS1 |
00000660  4d 2f 42 00 20 00 57 4f  49 4e 42 4f 4e 44 20 20  |M/B. .WOINBOND  |
00000670  20 20 00 20 00 20 00 57  32 35 58 38 30 20 20 20  |  . . .W25X80   |
00000680  20 20 20 20 20 20 20 20  20 20 20 00 00 14 13 30  |           ....0|
00000690  00 00 00 00 00 ff 03 00  00 2f 00 2e 00 01 00 00  |........./......|
000006a0  00 00 20 14 31 00 00 00  00 00 00 00 00 00 00 00  |.. .1...........|
000006b0  00 00 00 00 00 00 00 00  88 06 32 00 5a 5a 00 00  |..........2.ZZ..|
000006c0  7f 04 33 00 00 00                                 |..3...|
000006c6
tux@slitaz:~/temp$ 

Slitaz -- iasl / acpi -5

root=/dev/sda1 acpi=ht
please boot with early_ioremap_debug and report the dmesg.

root@slitaz:~# cat /proc/cmdline 
root=/dev/sda1 acpi=ht
root@slitaz:~# cat /proc/iomem | grep ACPI
7dd90000-7dd9dfff : ACPI Tables
7dd9e000-7dddffff : ACPI Non-volatile Storage
root@slitaz:~# cat /proc/iomem | grep APIC
fec00000-fec00fff : IOAPIC 0
fee00000-fee00fff : Local APIC
root@slitaz:~# cat /proc/ioports | grep ACPI
0800-0803 : ACPI PM1a_EVT_BLK
0804-0805 : ACPI PM1a_CNT_BLK
0808-080b : ACPI PM_TMR
0820-082f : ACPI GPE0_BLK
0850-0850 : ACPI PM2_CNT_BLK
root@slitaz:~# cat /proc/interrupts | grep APIC
  0:        119          0   IO-APIC-edge      timer
  1:          1          1   IO-APIC-edge      i8042
 12:          2          2   IO-APIC-edge      i8042
 16:          0          0   IO-APIC-fasteoi   uhci_hcd:usb3, uhci_hcd:usb7
 17:          3          4   IO-APIC-fasteoi   eth1
 18:          0          0   IO-APIC-fasteoi   ehci_hcd:usb1, uhci_hcd:usb6
 19:      20574      20534   IO-APIC-fasteoi   ata_piix, uhci_hcd:usb5
 22:        102        102   IO-APIC-fasteoi   HDA Intel
 23:      19107      19148   IO-APIC-fasteoi   ehci_hcd:usb2, uhci_hcd:usb4
root@slitaz:~# 
root@slitaz:~# dmesg | grep ACPI
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: Interpreter disabled.
pnp: PnP ACPI: disabled
root@slitaz:~# dmesg | grep APIC
Booting processor 1 APIC 0x1 ip 0x6000
pci 0000:00:02.0: PCI->APIC IRQ transform: INT A -> IRQ 16
pci 0000:00:1a.0: PCI->APIC IRQ transform: INT A -> IRQ 16
pci 0000:00:1a.7: PCI->APIC IRQ transform: INT C -> IRQ 18
pci 0000:00:1b.0: PCI->APIC IRQ transform: INT A -> IRQ 22
pci 0000:00:1c.0: PCI->APIC IRQ transform: INT A -> IRQ 17
pci 0000:00:1c.1: PCI->APIC IRQ transform: INT B -> IRQ 16
pci 0000:00:1d.0: PCI->APIC IRQ transform: INT A -> IRQ 23
pci 0000:00:1d.1: PCI->APIC IRQ transform: INT B -> IRQ 19
pci 0000:00:1d.2: PCI->APIC IRQ transform: INT C -> IRQ 18
pci 0000:00:1d.3: PCI->APIC IRQ transform: INT D -> IRQ 16
pci 0000:00:1d.7: PCI->APIC IRQ transform: INT A -> IRQ 23
pci 0000:00:1f.2: PCI->APIC IRQ transform: INT B -> IRQ 19
pci 0000:00:1f.3: PCI->APIC IRQ transform: INT C -> IRQ 18
pci 0000:02:00.0: PCI->APIC IRQ transform: INT A -> IRQ 17

root@slitaz:~# dmesg
[..]
 virtual kernel memory layout:
    fixmap  : 0xfff4d000 - 0xfffff000   ( 712 kB)
    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
    vmalloc : 0xf7ffe000 - 0xff7fe000   ( 120 MB)
    lowmem  : 0xc0000000 - 0xf77fe000   ( 887 MB)
      .init : 0xc0595000 - 0xc05e7000   ( 328 kB)
      .data : 0xc041b514 - 0xc058b17c   (1471 kB)
      .text : 0xc0100000 - 0xc041b514   (3181 kB)
[..]
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
PCI: Not using MMCONFIG.
PCI: Using configuration type 1 for base access
bio: create slab  at 0
ACPI: Interpreter disabled.
[..]
------------[ cut here ]------------
WARNING: at arch/x86/mm/ioremap.c:603 check_early_ioremap_leak+0x48/0x5c()
Hardware name: ValueStar
Debug warning: early ioremap leak of 1 areas detected.
Modules linked in:
Pid: 1, comm: swapper Not tainted 2.6.30.6-slitaz #1
Call Trace:
 [] warn_slowpath_common+0x65/0x7c
 [] ? check_early_ioremap_leak+0x48/0x5c
 [] ? check_early_ioremap_leak+0x0/0x5c
 [] warn_slowpath_fmt+0x24/0x27
 [] check_early_ioremap_leak+0x48/0x5c
 [] do_one_initcall+0x4c/0x13a
 [] kernel_init+0x106/0x157
 [] ? kernel_init+0x0/0x157
 [] kernel_thread_helper+0x7/0x10
---[ end trace 22af55ae483f38e6 ]---
please boot with early_ioremap_debug and report the dmesg.
[..]

/var/log/messages
[..]
Mar  9 09:02:03 (none) user.warn kernel: ------------[ cut here ]------------
Mar  9 09:02:03 (none) user.warn kernel: WARNING: at arch/x86/mm/ioremap.c:603 check_early_ioremap_leak+0x48/0x5c()
Mar  9 09:02:03 (none) user.warn kernel: Hardware name: ValueStar
Mar  9 09:02:03 (none) user.warn kernel: Debug warning: early ioremap leak of 1 areas detected.
Mar  9 09:02:03 (none) user.warn kernel: Modules linked in:
Mar  9 09:02:03 (none) user.warn kernel: Pid: 1, comm: swapper Not tainted 2.6.30.6-slitaz #1
Mar  9 09:02:03 (none) user.warn kernel: Call Trace:
Mar  9 09:02:03 (none) user.warn kernel:  [] warn_slowpath_common+0x65/0x7c
Mar  9 09:02:03 (none) user.warn kernel:  [] ? check_early_ioremap_leak+0x48/0x5c
Mar  9 09:02:03 (none) user.warn kernel:  [] ? check_early_ioremap_leak+0x0/0x5c
Mar  9 09:02:03 (none) user.warn kernel:  [] warn_slowpath_fmt+0x24/0x27
Mar  9 09:02:03 (none) user.warn kernel:  [] check_early_ioremap_leak+0x48/0x5c
Mar  9 09:02:03 (none) user.warn kernel:  [] do_one_initcall+0x4c/0x13a
Mar  9 09:02:03 (none) user.warn kernel:  [] kernel_init+0x106/0x157
Mar  9 09:02:03 (none) user.warn kernel:  [] ? kernel_init+0x0/0x157
Mar  9 09:02:03 (none) user.warn kernel:  [] kernel_thread_helper+0x7/0x10
Mar  9 09:02:03 (none) user.warn kernel: ---[ end trace 426f01cc83ab8016 ]---
[..]